Logic device/transceiver/encoder
TI (Texas Instruments)
メーカー
CD74HC541 High-speed CMOS logic octal non-inverting buffer/line driver with 3-state outputs
説明
TI (Texas Instruments)
メーカー
SN65LVDS84A Flatlink? Low Voltage Differential Signaling (LVDS) Transmitter
説明
TI (Texas Instruments)
メーカー
Automotive 4-Channel, 2-Input, 3V to 18V NAND Gate with Schmitt Trigger Inputs 14-SOIC -40 to 125
説明
TI (Texas Instruments)
メーカー
The LCX244 contains eight independent non-inverting buffers with 3-state outputs. The device can be used as a memory address driver, clock driver, and bus-oriented transmitter/receiver. The LCX244 is suitable for low voltage (2.5V or 3.3V) VCC applications and is capable of interfacing to a 5V signal environment. The LCX244 uses an advanced CMOS process to achieve high-speed operation while maintaining the low power consumption of CMOS.
説明
TI (Texas Instruments)
メーカー
SN74HCT377 Octal D-type flip-flop with clock enable
説明
The 74AC14 and 74ACT14 contain six inverter gates, each with a Schmitt trigger input. They are capable of converting slowly varying input signals into clearly defined, jitter-free output signals. Plus, they have better noise margins than conventional inverters. The 74AC14 and 74ACT14 have hysteresis (typically 1.0V) between the positive-going and negative-going input thresholds, which is determined internally by the transistor ratio and is essentially insensitive to temperature and supply voltage variations.
説明
DIODES (US and Taiwan)
メーカー
DIODES (US and Taiwan)
メーカー
I-CORE (Zhongwei Love Core)
メーカー
I-CORE (Zhongwei Love Core)
メーカー
Type: Decoder/Multiplexer Low-level output current (IOL): 4.0mA High-level output current (IOH): 4.0mA Power supply: Single supply Supply voltage: 4.5V~5.5V Operating temperature: -40℃ ~+105℃
説明
ST (STMicroelectronics)
メーカー
TI (Texas Instruments)
メーカー
CD4077B CMOS Quad XOR Gate
説明
The MC74VHC1G32 is an advanced high-speed CMOS 2-input OR gate fabricated on a silicon-gate CMOS process. This internal circuit consists of multiple stages, including a buffer output, which provides high noise immunity and stable output. The MC74VHC1G32 input structure provides protection when voltages up to 5.5 V are applied regardless of the supply voltage. Therefore, the MC74VHC1G32 is used to interface 5 V circuits to 3 V circuits.
説明
TI (Texas Instruments)
メーカー
SN74LV244A Octal Buffer/Driver with 3-State Outputs
説明