Zilog
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
Z86E6116ASG
詳細を表示 DataSheets

Z86E6116ASG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Microcontroller
  • Characteristics: Low-power, high-performance, 16-bit microcontroller
  • Package: Surface Mount Technology (SMT)
  • Essence: Embedded system control and processing
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Architecture: 16-bit
  • Clock Speed: Up to 20 MHz
  • Memory: 16 KB ROM, 512 bytes RAM
  • I/O Pins: 32
  • Timers/Counters: 2
  • Serial Communication: UART, SPI, I2C
  • Operating Voltage: 2.7V to 5.5V
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The Z86E6116ASG microcontroller has a total of 44 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. P0.0 - General-purpose I/O pin
  4. P0.1 - General-purpose I/O pin
  5. P0.2 - General-purpose I/O pin
  6. P0.3 - General-purpose I/O pin
  7. P0.4 - General-purpose I/O pin
  8. P0.5 - General-purpose I/O pin
  9. P0.6 - General-purpose I/O pin
  10. P0.7 - General-purpose I/O pin
  11. P1.0 - General-purpose I/O pin
  12. P1.1 - General-purpose I/O pin
  13. P1.2 - General-purpose I/O pin
  14. P1.3 - General-purpose I/O pin
  15. P1.4 - General-purpose I/O pin
  16. P1.5 - General-purpose I/O pin
  17. P1.6 - General-purpose I/O pin
  18. P1.7 - General-purpose I/O pin
  19. P2.0 - General-purpose I/O pin
  20. P2.1 - General-purpose I/O pin
  21. P2.2 - General-purpose I/O pin
  22. P2.3 - General-purpose I/O pin
  23. P2.4 - General-purpose I/O pin
  24. P2.5 - General-purpose I/O pin
  25. P2.6 - General-purpose I/O pin
  26. P2.7 - General-purpose I/O pin
  27. P3.0 - General-purpose I/O pin
  28. P3.1 - General-purpose I/O pin
  29. P3.2 - General-purpose I/O pin
  30. P3.3 - General-purpose I/O pin
  31. P3.4 - General-purpose I/O pin
  32. P3.5 - General-purpose I/O pin
  33. P3.6 - General-purpose I/O pin
  34. P3.7 - General-purpose I/O pin
  35. XTAL1 - Crystal oscillator input
  36. XTAL2 - Crystal oscillator output
  37. RESET - Reset pin
  38. EA/VPP - External Access/Programming Voltage
  39. ALE - Address Latch Enable
  40. PSEN - Program Store Enable
  41. RD - Read control signal
  42. WR - Write control signal
  43. VCC - Power supply voltage
  44. GND - Ground

Functional Features

  • Low-power consumption for energy-efficient applications
  • High-performance 16-bit processing capabilities
  • Integrated memory for program storage and data handling
  • Multiple I/O pins for interfacing with external devices
  • Support for various serial communication protocols (UART, SPI, I2C)
  • Flexible clock speed options for different application requirements

Advantages and Disadvantages

Advantages: - Low-power consumption extends battery life in portable devices - High-performance processing enables complex tasks to be executed efficiently - Ample memory capacity for program storage and data handling - Versatile I/O pins facilitate easy interfacing with external devices - Support for multiple serial communication protocols enhances connectivity options

Disadvantages: - Limited memory capacity compared to some other microcontrollers - Relatively higher cost compared to lower-end microcontrollers - Availability may vary based on supplier and market demand

Working Principles

The Z86E6116ASG microcontroller operates based on the principles of embedded system control and processing. It executes instructions stored in its internal ROM (Read-Only Memory) and performs various tasks based on the input received from external devices through its I/O pins. The microcontroller communicates with other devices using serial communication protocols such as UART, SPI, or I2

技術ソリューションにおける Z86E6116ASG の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of Z86E6116ASG in technical solutions:

  1. Q: What is Z86E6116ASG? A: Z86E6116ASG is a microcontroller chip manufactured by Zilog, commonly used in various technical solutions.

  2. Q: What are the key features of Z86E6116ASG? A: Some key features include an 8-bit CPU, 16KB of ROM, 256 bytes of RAM, multiple I/O ports, timers, and serial communication capabilities.

  3. Q: What applications can Z86E6116ASG be used for? A: Z86E6116ASG can be used in a wide range of applications such as industrial control systems, home automation, consumer electronics, and automotive electronics.

  4. Q: How do I program Z86E6116ASG? A: Z86E6116ASG can be programmed using assembly language or high-level programming languages like C, using appropriate development tools and software.

  5. Q: Can Z86E6116ASG interface with other devices? A: Yes, Z86E6116ASG has multiple I/O ports that can be used to interface with various external devices such as sensors, displays, and actuators.

  6. Q: Does Z86E6116ASG support interrupts? A: Yes, Z86E6116ASG supports both hardware and software interrupts, allowing it to respond to external events in real-time.

  7. Q: What is the power supply requirement for Z86E6116ASG? A: Z86E6116ASG typically operates on a voltage range of 2.7V to 5.5V, making it compatible with a variety of power supply sources.

  8. Q: Can Z86E6116ASG communicate with other devices using serial communication? A: Yes, Z86E6116ASG has built-in UART (Universal Asynchronous Receiver-Transmitter) modules that enable serial communication with other devices.

  9. Q: Is Z86E6116ASG suitable for low-power applications? A: Yes, Z86E6116ASG has power-saving features like sleep mode and low-power consumption, making it suitable for battery-powered or energy-efficient applications.

  10. Q: Are there any development tools available for Z86E6116ASG? A: Yes, Zilog provides development tools like assemblers, compilers, debuggers, and evaluation boards to aid in the development of applications using Z86E6116ASG.

Please note that these answers are general and may vary depending on specific requirements and implementation details.