W25Q16DVSSIQ TR

Product Overview

• Category: Flash Memory
• Use: Data storage and retrieval in electronic devices
• Characteristics:
  • Non-volatile memory
  • High-speed data transfer
  • Low power consumption
  • Small form factor
• Package: SOP-8 (Small Outline Package)
• Essence: Serial NOR Flash Memory
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Memory Capacity: 16 Megabits (2 Megabytes)
• Interface: Serial Peripheral Interface (SPI)
• Operating Voltage: 2.7V to 3.6V
• Operating Temperature Range: -40°C to +85°C
• Erase/Program Time:
  • Sector Erase: 150ms (typical)
  • Chip Erase: 400ms (typical)
  • Page Program: 0.75ms (typical)

Detailed Pin Configuration

The W25Q16DVSSIQ TR has the following pin configuration:

1. CS (Chip Select): Active low input used to enable/disable device operation.
2. DO (Data Output): Serial data output from the device.
3. WP (Write Protect): Active low input used to protect the memory against write operations.
4. GND (Ground): Ground reference for the device.
5. DI (Data Input): Serial data input to the device.
6. CLK (Clock): Serial clock input for synchronization.
7. HOLD: Active low input used to pause serial communication without resetting the device.
8. VCC (Power Supply): Power supply voltage for the device.

Functional Features

• High-Speed Read: Allows fast access to stored data.
• Flexible Erase Options: Supports sector and chip erase operations.
• Page Program: Enables efficient programming of individual memory pages.
• Software/Hardware Write Protection: Provides security by preventing unauthorized write operations.
• Deep Power-Down Mode: Reduces power consumption when the device is not in use.

Advantages and Disadvantages

Advantages: - High-speed data transfer - Low power consumption - Small form factor - Flexible erase options

Disadvantages: - Limited memory capacity compared to other flash memory types - Relatively slower erase and program times

Working Principles

The W25Q16DVSSIQ TR operates based on the Serial Peripheral Interface (SPI) protocol. It uses a combination of clock and data signals to communicate with the host device. The memory cells store data using floating-gate transistors, which retain their charge even when power is removed. This non-volatile characteristic allows for reliable data storage and retrieval.

Detailed Application Field Plans

The W25Q16DVSSIQ TR is widely used in various electronic devices that require non-volatile data storage. Some common application fields include:

1. Consumer Electronics:

   • Smartphones
   • Tablets
   • Digital cameras
   • Gaming consoles

2. Automotive Systems:

   • Infotainment systems
   • Instrument clusters
   • Advanced driver-assistance systems (ADAS)

3. Industrial Equipment:

   • Programmable logic controllers (PLCs)
   • Human-machine interfaces (HMIs)
   • Data loggers

4. Communication Devices:

   • Routers
   • Modems
   • Set-top boxes

Detailed and Complete Alternative Models

Some alternative models to the W25Q16DVSSIQ TR are:

1. W25Q32JVSSIQ TR: 32 Megabit (4 Megabyte) capacity, similar specifications.
2. W25Q64JVSSIQ TR: 64 Megabit (8 Megabyte) capacity, similar specifications.
3. W25Q128JVSSIQ TR: 128 Megabit (16 Megabyte) capacity, similar specifications.

These alternative models offer increased memory capacity while maintaining compatibility and similar performance characteristics.

Word count: 511 words