画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SI7860DP-T1-GE3

SI7860DP-T1-GE3

Introduction

The SI7860DP-T1-GE3 is a power management product designed for use in various electronic devices. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Power Management IC
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low dropout voltage, thermal shutdown protection
  • Package: DFN-8 (3x3)
  • Essence: Regulating voltage for stable operation of electronic devices
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6V
  • Output Voltage Range: 0.8V to 5V
  • Maximum Output Current: 3A
  • Operating Temperature Range: -40°C to 125°C
  • Quiescent Current: 75µA

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. FB (Feedback)
  6. NC (No Connection)
  7. PG (Power Good)
  8. VOUT (Output Voltage)

Functional Features

  • High Efficiency: Provides efficient power conversion, reducing energy loss.
  • Low Dropout Voltage: Maintains stable output even with small input-output differentials.
  • Thermal Shutdown Protection: Safeguards the device from overheating.

Advantages and Disadvantages

Advantages

  • High efficiency leads to energy savings.
  • Wide input voltage range allows for versatile applications.
  • Thermal shutdown protection enhances reliability.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Requires careful consideration of thermal management due to small package size.

Working Principles

The SI7860DP-T1-GE3 operates by regulating the input voltage to provide a stable output voltage, ensuring proper functioning of electronic devices. It utilizes internal circuitry to achieve high efficiency and incorporates thermal shutdown protection to prevent damage from excessive heat.

Detailed Application Field Plans

The SI7860DP-T1-GE3 is well-suited for various applications, including: - Portable electronic devices - Battery-powered systems - IoT (Internet of Things) devices - Consumer electronics

Detailed and Complete Alternative Models

  • SI7850DP-T1-GE3: Similar specifications with a lower output current of 2A.
  • SI7865DP-T1-GE3: Higher output current of 5A with similar input and output voltage ranges.

In conclusion, the SI7860DP-T1-GE3 is a versatile power management IC with a focus on efficiency and reliability, making it suitable for a wide range of electronic applications.

[Word Count: 410]

技術ソリューションにおける SI7860DP-T1-GE3 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum voltage rating for SI7860DP-T1-GE3?

    • The maximum voltage rating for SI7860DP-T1-GE3 is 60V.
  2. What is the typical application of SI7860DP-T1-GE3?

    • SI7860DP-T1-GE3 is commonly used in power management solutions, such as in DC-DC converters and voltage regulators.
  3. What is the operating temperature range for SI7860DP-T1-GE3?

    • The operating temperature range for SI7860DP-T1-GE3 is typically -40°C to 125°C.
  4. What is the package type for SI7860DP-T1-GE3?

    • SI7860DP-T1-GE3 comes in a compact DFN package, which is suitable for space-constrained applications.
  5. Does SI7860DP-T1-GE3 have built-in protection features?

    • Yes, SI7860DP-T1-GE3 includes overcurrent protection and thermal shutdown features to ensure safe operation.
  6. Can SI7860DP-T1-GE3 be used in automotive applications?

    • Yes, SI7860DP-T1-GE3 is AEC-Q100 qualified, making it suitable for automotive electronics applications.
  7. What is the typical efficiency of SI7860DP-T1-GE3?

    • SI7860DP-T1-GE3 offers high efficiency, typically above 90%, making it suitable for energy-efficient designs.
  8. Is SI7860DP-T1-GE3 compatible with both analog and digital control interfaces?

    • Yes, SI7860DP-T1-GE3 supports both analog and digital control interfaces, providing flexibility in system design.
  9. What are the key benefits of using SI7860DP-T1-GE3 in power management solutions?

    • Some key benefits include high efficiency, small footprint, and integrated protection features, simplifying system design and enhancing reliability.
  10. Are there any application notes or reference designs available for SI7860DP-T1-GE3?

    • Yes, application notes and reference designs are available to assist engineers in implementing SI7860DP-T1-GE3 in their technical solutions.