画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SI4565ADY-T1-E3

SI4565ADY-T1-E3

Product Overview

Category

The SI4565ADY-T1-E3 belongs to the category of power MOSFETs.

Use

It is commonly used in power management applications such as voltage regulation and switching circuits.

Characteristics

  • High power handling capability
  • Low on-state resistance
  • Fast switching speed
  • Low gate drive requirements

Package

The SI4565ADY-T1-E3 is typically available in a small outline package (SOP) or a dual flat no-leads (DFN) package.

Essence

This MOSFET is essential for efficient power control and management in various electronic devices and systems.

Packaging/Quantity

It is usually supplied in reels containing a specific quantity, such as 3000 units per reel.

Specifications

  • Drain-Source Voltage: 30V
  • Continuous Drain Current: 18A
  • On-State Resistance: 6.5mΩ
  • Power Dissipation: 2.5W
  • Gate-Source Voltage: ±20V

Detailed Pin Configuration

The SI4565ADY-T1-E3 typically has three pins: the gate, drain, and source. The pinout configuration is as follows: - Pin 1 (Gate) - Pin 2 (Drain) - Pin 3 (Source)

Functional Features

  • Low conduction losses
  • Enhanced thermal performance
  • High efficiency in power management circuits
  • Compatibility with low-voltage control signals

Advantages

  • Reduced power dissipation
  • Improved system efficiency
  • Compact design due to smaller package size
  • Suitable for high-frequency switching applications

Disadvantages

  • Sensitivity to electrostatic discharge (ESD)
  • Limited maximum voltage and current ratings compared to some higher-power MOSFETs

Working Principles

The SI4565ADY-T1-E3 operates based on the principle of field-effect transistors, where the flow of current between the drain and source terminals is controlled by the voltage applied to the gate terminal.

Detailed Application Field Plans

This MOSFET is widely used in various applications, including: - Switching power supplies - DC-DC converters - Motor control circuits - Battery management systems - LED lighting drivers

Detailed and Complete Alternative Models

Some alternative models to the SI4565ADY-T1-E3 include: - SI2301DS-T1-GE3 - SI2337DS-T1-GE3 - SI4410DY-T1-GE3 - SI7469DP-T1-GE3

In conclusion, the SI4565ADY-T1-E3 power MOSFET offers high performance and efficiency in power management applications, making it a valuable component in modern electronic systems.

Word Count: 368

技術ソリューションにおける SI4565ADY-T1-E3 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum voltage rating for SI4565ADY-T1-E3?

    • The maximum voltage rating for SI4565ADY-T1-E3 is typically 30V.
  2. What is the maximum current rating for SI4565ADY-T1-E3?

    • The maximum continuous drain current for SI4565ADY-T1-E3 is typically around 10A.
  3. What is the on-resistance of SI4565ADY-T1-E3?

    • The on-resistance of SI4565ADY-T1-E3 varies, but it is typically in the range of a few milliohms.
  4. What are the typical applications for SI4565ADY-T1-E3?

    • SI4565ADY-T1-E3 is commonly used in power management and load switching applications in various electronic devices.
  5. Is SI4565ADY-T1-E3 suitable for automotive applications?

    • Yes, SI4565ADY-T1-E3 is designed to meet the requirements for automotive applications.
  6. What is the thermal resistance of SI4565ADY-T1-E3?

    • The thermal resistance of SI4565ADY-T1-E3 is typically specified in the datasheet and can vary based on the package type.
  7. Does SI4565ADY-T1-E3 have built-in protection features?

    • Yes, SI4565ADY-T1-E3 may include built-in protection features such as overcurrent protection and thermal shutdown.
  8. What is the operating temperature range for SI4565ADY-T1-E3?

    • The operating temperature range for SI4565ADY-T1-E3 is typically specified in the datasheet and can vary based on the application.
  9. Can SI4565ADY-T1-E3 be used in high-frequency switching applications?

    • Yes, SI4565ADY-T1-E3 is suitable for high-frequency switching applications due to its low on-resistance and fast switching characteristics.
  10. Are there any recommended layout considerations for using SI4565ADY-T1-E3 in a PCB design?

    • Yes, the datasheet for SI4565ADY-T1-E3 typically includes recommended layout guidelines to optimize performance and minimize interference.