Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
VS-VSKC196/08PBF
詳細を表示 DataSheets

VS-VSKC196/08PBF

Introduction

The VS-VSKC196/08PBF is a power module designed for use in industrial and commercial applications. This entry provides an overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Power Module
  • Use: Industrial and Commercial Applications
  • Characteristics: High Efficiency, Compact Design, Reliable Performance
  • Package: TO-220AC
  • Essence: Power Conversion and Regulation
  • Packaging/Quantity: Individual Unit Packaging

Specifications

  • Input Voltage: 200V - 400V
  • Output Voltage: 24V
  • Output Current: 8A
  • Operating Temperature: -40°C to 125°C
  • Isolation Voltage: 2500Vrms
  • Switching Frequency: 200kHz

Detailed Pin Configuration

  1. Pin 1: Input Voltage (VIN+)
  2. Pin 2: Ground (GND)
  3. Pin 3: Output Voltage (VOUT+)
  4. Pin 4: Output Voltage Sense (VSENSE)
  5. Pin 5: No Connection (NC)
  6. Pin 6: Output Voltage (VOUT-)
  7. Pin 7: Ground (GND)
  8. Pin 8: Input Voltage (VIN-)

Functional Features

  • High Efficiency: The module offers high efficiency, minimizing power loss during operation.
  • Overcurrent Protection: Built-in overcurrent protection ensures safe operation under varying load conditions.
  • Compact Design: The compact form factor makes it suitable for space-constrained applications.
  • Wide Operating Temperature Range: Capable of operating in extreme temperature environments.

Advantages and Disadvantages

Advantages

  • High Efficiency
  • Overcurrent Protection
  • Compact Design
  • Wide Operating Temperature Range

Disadvantages

  • Limited Output Current Capacity
  • Requires Adequate Heat Dissipation

Working Principles

The VS-VSKC196/08PBF operates on the principle of pulse-width modulation (PWM) to regulate the output voltage. It utilizes a combination of semiconductor devices and control circuitry to achieve efficient power conversion and regulation.

Detailed Application Field Plans

The VS-VSKC196/08PBF is well-suited for various industrial and commercial applications, including: - Industrial Automation Systems - Power Supplies for Manufacturing Equipment - Motor Control Systems - Renewable Energy Systems

Detailed and Complete Alternative Models

  • VS-VSKC196/10PBF: Similar specifications with higher output current capacity (10A).
  • VS-VSKC196/06PBF: Similar specifications with lower output current capacity (6A).
  • VS-VSKC196/12PBF: Similar specifications with higher output current capacity (12A).

In conclusion, the VS-VSKC196/08PBF power module offers high efficiency, reliable performance, and a compact design, making it suitable for a wide range of industrial and commercial applications. Its functional features, advantages, and disadvantages provide valuable insights for potential users and designers.

[Word Count: 413]

技術ソリューションにおける VS-VSKC196/08PBF の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the VS-VSKC196/08PBF?

    • The VS-VSKC196/08PBF is a high-power, high-frequency silicon carbide (SiC) MOSFET designed for use in power electronics applications.

  2. What are the key features of the VS-VSKC196/08PBF?

    • The VS-VSKC196/08PBF features low on-resistance, high-speed switching, and high-temperature operation, making it suitable for demanding power conversion applications.

  3. What are the typical applications of the VS-VSKC196/08PBF?

    • Typical applications include solar inverters, motor drives, electric vehicle charging systems, and industrial power supplies.

  4. What are the advantages of using the VS-VSKC196/08PBF in technical solutions?

    • The VS-VSKC196/08PBF offers improved efficiency, reduced size and weight, and enhanced reliability compared to traditional silicon-based power devices.

  5. What are the voltage and current ratings of the VS-VSKC196/08PBF?

    • The VS-VSKC196/08PBF has a voltage rating of 1200V and a continuous drain current rating of 196A.

  6. How does the VS-VSKC196/08PBF compare to other power MOSFETs in its class?

    • Compared to other MOSFETs, the VS-VSKC196/08PBF offers lower conduction losses, faster switching speeds, and better thermal performance, leading to overall higher system efficiency.

  7. Are there any specific thermal management considerations when using the VS-VSKC196/08PBF?

    • Proper thermal management is crucial due to the high power density of the VS-VSKC196/08PBF. Adequate heat sinking and cooling should be implemented to ensure reliable operation.

  8. What are the recommended gate drive requirements for the VS-VSKC196/08PBF?

    • The VS-VSKC196/08PBF requires a gate driver capable of delivering fast and precise control signals to maximize its switching performance.

  9. Can the VS-VSKC196/08PBF be used in parallel configurations for higher power applications?

    • Yes, the VS-VSKC196/08PBF can be paralleled to increase the overall current-handling capability and power output in high-power applications.

  10. Where can I find detailed technical specifications and application notes for the VS-VSKC196/08PBF?

    • Detailed technical information and application notes for the VS-VSKC196/08PBF can be found on the manufacturer's website or by contacting their technical support team.