Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
GBL06-M3/45
詳細を表示 DataSheets

GBL06-M3/45 Encyclopedia Entry

Product Overview

Category

The GBL06-M3/45 belongs to the category of semiconductor devices.

Use

It is commonly used as a bridge rectifier in electronic circuits.

Characteristics

  • High efficiency
  • Compact size
  • Low power consumption

Package

The GBL06-M3/45 is typically available in a standard through-hole package.

Essence

This product serves as a crucial component in converting alternating current (AC) to direct current (DC) in various electronic applications.

Packaging/Quantity

The GBL06-M3/45 is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Average Forward Current: 6A
  • Maximum Peak Reverse Voltage: 600V
  • Operating Temperature Range: -55°C to 150°C
  • Forward Voltage Drop: 1.1V at 3A

Detailed Pin Configuration

The GBL06-M3/45 has four pins arranged in a specific configuration to facilitate its integration into electronic circuits. The pinout is as follows: 1. Pin 1: Anode 2. Pin 2: Cathode 3. Pin 3: No Connection 4. Pin 4: Anode

Functional Features

  • Full-wave bridge rectification
  • Reliable and consistent performance
  • Low leakage current

Advantages

  • High efficiency conversion of AC to DC
  • Compact design for space-constrained applications
  • Suitable for high-frequency operations

Disadvantages

  • Higher cost compared to traditional diode rectifiers
  • Sensitive to voltage spikes and surges

Working Principles

The GBL06-M3/45 operates on the principle of full-wave bridge rectification, where it converts the entire input AC waveform into a pulsating DC output.

Detailed Application Field Plans

The GBL06-M3/45 finds extensive use in the following application fields: - Power supplies - Battery chargers - Motor drives - LED lighting systems

Detailed and Complete Alternative Models

Some alternative models to the GBL06-M3/45 include: - GBL10-M3/45 - GBL20-M3/45 - GBL40-M3/45

In conclusion, the GBL06-M3/45 is a vital semiconductor device that plays a crucial role in converting AC to DC in various electronic applications. Its compact size, high efficiency, and reliable performance make it a preferred choice for many designers and engineers.

[Word Count: 345]

技術ソリューションにおける GBL06-M3/45 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is GBL06-M3/45?

    • GBL06-M3/45 is a specific type of diode bridge rectifier commonly used in technical solutions to convert alternating current (AC) to direct current (DC).

  2. What are the typical applications of GBL06-M3/45?

    • GBL06-M3/45 is often used in power supplies, battery chargers, and various electronic devices that require DC power.

  3. What is the maximum voltage and current rating for GBL06-M3/45?

    • The maximum voltage rating for GBL06-M3/45 is typically around 600 volts, and the maximum current rating is approximately 4.0 amps.

  4. How do I connect GBL06-M3/45 in a circuit?

    • GBL06-M3/45 can be connected in a bridge configuration to convert AC to DC. It has four terminals: two for the input AC voltage and two for the output DC voltage.

  5. What are the key specifications to consider when using GBL06-M3/45 in a technical solution?

    • Key specifications to consider include the maximum voltage and current ratings, forward voltage drop, reverse leakage current, and operating temperature range.

  6. Are there any heat dissipation considerations when using GBL06-M3/45?

    • Yes, GBL06-M3/45 may generate heat during operation, so it's important to ensure proper heat sinking or ventilation to prevent overheating.

  7. Can GBL06-M3/45 be used in automotive applications?

    • Yes, GBL06-M3/45 can be used in automotive applications such as vehicle charging systems and power converters.

  8. What are the common failure modes for GBL06-M3/45?

    • Common failure modes include overvoltage stress, overcurrent conditions, and thermal overstress, which can lead to permanent damage or degradation.

  9. Is GBL06-M3/45 suitable for high-frequency applications?

    • GBL06-M3/45 is not typically recommended for high-frequency applications due to its inherent capacitance and switching characteristics.

  10. Where can I find detailed technical specifications and application notes for GBL06-M3/45?

    • Detailed technical specifications and application notes for GBL06-M3/45 can usually be found in the manufacturer's datasheet or application guides, which are available on the manufacturer's website or through authorized distributors.