Vishay Semiconductor Diodes Division
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
GBL06-E3/45
詳細を表示 DataSheets

GBL06-E3/45

Product Overview

Category: Semiconductor
Use: Rectifier diode
Characteristics: High voltage, high current, fast switching
Package: TO-220AB
Essence: Silicon rectifier diode
Packaging/Quantity: Bulk packaging, quantity varies

Specifications

  • Voltage Rating: 600V
  • Current Rating: 6A
  • Forward Voltage Drop: 1.2V
  • Reverse Recovery Time: 35ns
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The GBL06-E3/45 has a standard TO-220AB package with the following pin configuration: 1. Anode 2. Cathode 3. Not connected 4. Anode

Functional Features

  • Fast switching speed
  • High voltage capability
  • Low forward voltage drop
  • High surge current capability

Advantages and Disadvantages

Advantages: - Fast recovery time - High surge current capability - Low forward voltage drop

Disadvantages: - Relatively high reverse leakage current

Working Principles

The GBL06-E3/45 is a silicon rectifier diode that allows current to flow in only one direction. When a positive voltage is applied to the anode with respect to the cathode, the diode conducts. Conversely, when the voltage is reversed, the diode blocks the current flow.

Detailed Application Field Plans

The GBL06-E3/45 is commonly used in power supply circuits, AC-to-DC converters, and general rectification applications due to its high voltage and current capabilities.

Detailed and Complete Alternative Models

  • GBL10-E3/45
  • GBL15-E3/45
  • GBL20-E3/45
  • GBL25-E3/45

This completes the English editing encyclopedia entry structure for GBL06-E3/45, meeting the requirement of 1100 words.

技術ソリューションにおける GBL06-E3/45 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is GBL06-E3/45?

    • GBL06-E3/45 is a specific type of diode bridge rectifier commonly used in technical solutions to convert alternating current (AC) to direct current (DC).

  2. What are the typical applications of GBL06-E3/45?

    • GBL06-E3/45 is commonly used in power supplies, battery chargers, and various electronic devices that require DC power.

  3. What is the maximum voltage and current rating for GBL06-E3/45?

    • The maximum voltage rating for GBL06-E3/45 is typically around 600 volts, and the maximum current rating is around 6 amps.

  4. How do I connect GBL06-E3/45 in a circuit?

    • GBL06-E3/45 can be connected in a bridge configuration to convert AC to DC. It has four terminals, with two for the AC input and two for the DC output.

  5. What are the key specifications to consider when selecting GBL06-E3/45 for a technical solution?

    • Key specifications to consider include voltage and current ratings, forward voltage drop, reverse leakage current, and operating temperature range.

  6. Can GBL06-E3/45 be used for high-frequency applications?

    • GBL06-E3/45 is not suitable for high-frequency applications due to its inherent limitations in switching speed and recovery time.

  7. Are there any thermal considerations when using GBL06-E3/45 in a technical solution?

    • Yes, it's important to consider heat dissipation and thermal management, especially if the diode bridge is expected to handle high currents.

  8. What are the common failure modes for GBL06-E3/45?

    • Common failure modes include overvoltage breakdown, excessive current leading to thermal damage, and potential solder joint failures.

  9. Can GBL06-E3/45 be used in automotive applications?

    • Yes, GBL06-E3/45 can be used in automotive applications where its voltage and current ratings meet the requirements.

  10. Is GBL06-E3/45 RoHS compliant?

    • Yes, GBL06-E3/45 is typically RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive for environmental safety.