OPB841W55Z Product Overview
Introduction
The OPB841W55Z is a versatile optical sensor designed for various applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.
Product Information Overview
Category
The OPB841W55Z belongs to the category of optical sensors.
Use
This sensor is commonly used for detecting the presence or absence of an object, as well as for position sensing and motion control applications.
Characteristics
- High sensitivity
- Compact design
- Reliable performance
- Wide operating temperature range
Package
The sensor is typically housed in a compact, durable casing suitable for various environments.
Essence
The essence of the OPB841W55Z lies in its ability to provide accurate and reliable optical sensing capabilities.
Packaging/Quantity
The sensor is usually available in standard packaging and quantities suitable for different production needs.
Specifications
- Operating Voltage: 3.3V - 5V
- Output Type: Digital
- Sensing Method: Reflective
- Detection Range: Up to 10mm
- Operating Temperature: -40°C to 85°C
Detailed Pin Configuration
The OPB841W55Z features a standard pin configuration with specific pins designated for power, ground, and signal output.
| Pin Name | Description | |----------|-----------------| | VCC | Power Supply | | GND | Ground | | OUT | Digital Output |
Functional Features
- High-speed response
- Built-in ambient light rejection
- Easy integration into existing systems
- Low power consumption
Advantages and Disadvantages
Advantages
- Accurate detection capabilities
- Versatile usage scenarios
- Robust construction
- Minimal maintenance requirements
Disadvantages
- Limited detection range
- Susceptible to ambient light interference
Working Principles
The OPB841W55Z operates based on the principle of reflective sensing, where it emits an infrared light beam and detects the reflection from the target object. The presence or absence of the reflected light is then converted into a digital output signal.
Detailed Application Field Plans
The OPB841W55Z finds extensive use in various fields, including: - Industrial automation - Robotics - Printers and copiers - Security systems - Consumer electronics
Detailed and Complete Alternative Models
- OPB9000: Offers extended detection range
- OPB700: Compact design for space-constrained applications
- OPB960T51: Enhanced ambient light rejection capabilities
In conclusion, the OPB841W55Z is a reliable optical sensor with diverse applications and robust performance characteristics, making it a valuable component in numerous electronic and industrial systems.
[Word Count: 470]
技術ソリューションにおける OPB841W55Z の適用に関連する 10 件の一般的な質問と回答をリストします。
What is OPB841W55Z?
- OPB841W55Z is a reflective object sensor with an infrared LED and phototransistor designed for use in various technical solutions.
What are the typical applications of OPB841W55Z?
- OPB841W55Z is commonly used in applications such as robotics, industrial automation, assembly line monitoring, and object detection.
How does OPB841W55Z work?
- The infrared LED emits light, which is then reflected off an object and detected by the phototransistor, allowing the sensor to determine the presence or absence of the object.
What is the operating voltage range of OPB841W55Z?
- OPB841W55Z typically operates within a voltage range of 4.5V to 5.5V.
What is the sensing distance of OPB841W55Z?
- The sensing distance of OPB841W55Z is typically around 0.2 inches to 0.4 inches (5mm to 10mm).
Can OPB841W55Z be used in outdoor environments?
- OPB841W55Z is primarily designed for indoor use and may not perform optimally in outdoor environments due to ambient light interference.
Is OPB841W55Z resistant to environmental factors such as dust and moisture?
- While OPB841W55Z is not specifically rated for resistance to dust and moisture, it can be used effectively in controlled indoor environments.
What output does OPB841W55Z provide?
- OPB841W55Z typically provides a digital output, indicating the presence or absence of the detected object.
Can OPB841W55Z be used in conjunction with microcontrollers or PLCs?
- Yes, OPB841W55Z can be easily integrated with microcontrollers or PLCs to enable automated control and decision-making based on the sensor's output.
Are there any special considerations for mounting and aligning OPB841W55Z?
- Proper alignment and mounting are crucial for optimal performance. Care should be taken to ensure that the sensor is positioned at the correct distance and angle relative to the target object for reliable operation.