Toshiba Semiconductor and Storage
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
RN2505TE85LF
詳細を表示 DataSheets

RN2505TE85LF Product Overview

Introduction

The RN2505TE85LF is a versatile electronic component designed for use in various applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Information Overview

Category

The RN2505TE85LF belongs to the category of integrated circuits (ICs) and specifically falls under the family of voltage regulators.

Use

This component is primarily used to regulate voltage within electronic circuits, ensuring a stable and reliable power supply for connected devices.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Thermal shutdown protection
  • Overcurrent protection
  • Wide input voltage range

Package

The RN2505TE85LF is typically available in a small outline transistor (SOT) package, which facilitates easy integration into circuit boards.

Essence

The essence of this product lies in its ability to provide consistent and regulated voltage output, contributing to the overall reliability and performance of electronic systems.

Packaging/Quantity

The RN2505TE85LF is commonly supplied in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: Adjustable from 1.2V to 5.5V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 300mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The RN2505TE85LF features a standard three-pin configuration: 1. Input (VIN) 2. Ground (GND) 3. Output (VOUT)

Functional Features

  • Voltage Regulation: The IC maintains a stable output voltage despite variations in input voltage and load conditions.
  • Overcurrent Protection: Safeguards the circuit by limiting the output current during fault conditions.
  • Thermal Shutdown: Prevents damage due to excessive heat by shutting down the regulator when temperatures exceed safe limits.

Advantages and Disadvantages

Advantages

  • Compact size
  • Wide input voltage range
  • Built-in protection features
  • Precise voltage regulation

Disadvantages

  • Limited maximum output current
  • Higher dropout voltage compared to some alternatives

Working Principles

The RN2505TE85LF operates based on the principle of feedback control, where it continuously adjusts its internal circuitry to maintain the desired output voltage regardless of changes in input or load conditions.

Detailed Application Field Plans

The RN2505TE85LF finds extensive use in various electronic applications, including: - Battery-powered devices - Portable consumer electronics - Embedded systems - IoT devices - Automotive electronics

Detailed and Complete Alternative Models

Several alternative models to the RN2505TE85LF include: - LM1117 - MCP1700 - TS2940 - XC6206

These alternatives offer similar voltage regulation capabilities and are suitable replacements based on specific application requirements.

In conclusion, the RN2505TE85LF serves as a reliable voltage regulator with a wide range of applications, offering precise regulation and built-in protection features. Its compact size and versatility make it a popular choice for designers seeking stable power solutions in their electronic designs.

Word count: 511

技術ソリューションにおける RN2505TE85LF の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is RN2505TE85LF?

    • RN2505TE85LF is a specific model of resistor used in electronic circuits, known for its precision and reliability.

  2. What are the key specifications of RN2505TE85LF?

    • The key specifications include a resistance value of 2505 ohms, a tolerance of ±1%, and a power rating of 0.125W.

  3. In what types of technical solutions is RN2505TE85LF commonly used?

    • RN2505TE85LF is commonly used in various electronic devices and circuits, including power supplies, amplifiers, and sensor interfaces.

  4. How does RN2505TE85LF contribute to circuit design?

    • RN2505TE85LF provides precise resistance values, which help in controlling current flow and voltage levels within the circuit.

  5. What are the temperature characteristics of RN2505TE85LF?

    • RN2505TE85LF has stable temperature characteristics, making it suitable for applications where temperature variations can impact performance.

  6. Can RN2505TE85LF be used in high-frequency applications?

    • Yes, RN2505TE85LF can be used in high-frequency applications due to its stable performance across a wide frequency range.

  7. Are there any recommended soldering techniques for RN2505TE85LF?

    • It is recommended to use lead-free soldering techniques and to follow the manufacturer's guidelines for proper soldering of RN2505TE85LF.

  8. What are the potential alternatives to RN2505TE85LF?

    • Some potential alternatives to RN2505TE85LF include resistors with similar resistance values and tolerances from different manufacturers.

  9. How can I ensure the reliability of RN2505TE85LF in my technical solution?

    • Ensuring proper handling, storage, and adherence to operating conditions specified by the manufacturer can help ensure the reliability of RN2505TE85LF.

  10. Where can I find detailed technical documentation for RN2505TE85LF?

    • Detailed technical documentation for RN2505TE85LF can be found on the manufacturer's website or by contacting their technical support team.