Toshiba Semiconductor and Storage
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
RN2405,LF
詳細を表示 DataSheets

RN2405,LF

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: Low dropout, low noise, high accuracy
Package: SOT-23
Essence: Regulating voltage with high efficiency and low noise
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 1.2V to 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 190mV at 150mA
  • Quiescent Current: 75µA
  • Noise Level: 30µVrms (10Hz to 100kHz)
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage for extended battery life
  • Low noise output for sensitive applications
  • High accuracy over line and load variations
  • Thermal shutdown and current limit protection

Advantages and Disadvantages

Advantages: - Extended battery life due to low dropout voltage - Suitable for noise-sensitive applications - Wide operating temperature range

Disadvantages: - Limited output current compared to some alternatives - Higher quiescent current than some competing models

Working Principles

RN2405,LF is a voltage regulator that maintains a stable output voltage even when the input voltage fluctuates. It achieves this by using a feedback mechanism to adjust its internal circuitry, ensuring a consistent output within specified tolerances.

Detailed Application Field Plans

The RN2405,LF is well-suited for portable electronic devices, such as smartphones, tablets, and wearable gadgets, where extending battery life and minimizing electrical noise are critical requirements. It can also be used in sensor modules, IoT devices, and other low-power applications.

Detailed and Complete Alternative Models

  • LM1117: Similar dropout voltage and output current, but lower noise level
  • XC6206: Lower dropout voltage and quiescent current, but limited output current

Note: The alternative models provided are for reference purposes and may have different specifications and characteristics.

This comprehensive entry provides an in-depth understanding of the RN2405,LF, covering its product details, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

技術ソリューションにおける RN2405,LF の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is RN2405,LF?

    • RN2405,LF is a low forward voltage drop Schottky diode designed for applications requiring low power loss and high efficiency.

  2. What are the typical applications of RN2405,LF?

    • Typical applications include polarity protection, freewheeling diodes, and OR-ing diodes in power management and other electronic devices.

  3. What is the maximum forward voltage of RN2405,LF?

    • The maximum forward voltage is typically around 0.55V at a forward current of 2A.

  4. What is the reverse voltage rating of RN2405,LF?

    • The reverse voltage rating is typically 40V.

  5. What is the operating temperature range of RN2405,LF?

    • The operating temperature range is usually from -65°C to 125°C.

  6. Can RN2405,LF be used in automotive applications?

    • Yes, RN2405,LF is suitable for use in automotive electronics due to its robust construction and wide temperature range.

  7. Does RN2405,LF require any external components for typical applications?

    • In most cases, no additional external components are required for typical applications.

  8. What are the key advantages of using RN2405,LF in technical solutions?

    • The key advantages include low forward voltage drop, high efficiency, and suitability for various power management applications.

  9. Is RN2405,LF RoHS compliant?

    • Yes, RN2405,LF is RoHS compliant, making it suitable for use in environmentally sensitive applications.

  10. Are there any specific layout considerations when using RN2405,LF in a circuit?

    • It is recommended to minimize the length of the traces between the diode and the load to reduce voltage drops and improve performance.