Toshiba Semiconductor and Storage
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
DF6F6.8MTU,LF
詳細を表示 DataSheets

DF6F6.8MTU,LF

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: SOT-23-5
Essence: Regulates voltage to a stable level
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage: 2.5V to 6.5V
  • Output Voltage: 0.8V to 5.5V
  • Output Current: 150mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 40µA
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. NC
  4. VIN
  5. EN

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit and overcurrent protection
  • Enable pin for power savings

Advantages and Disadvantages

Advantages: - Wide input voltage range - Small package size - Low dropout voltage - Low quiescent current

Disadvantages: - Limited output current - Requires external capacitors for stability

Working Principles

The DF6F6.8MTU,LF is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage. It achieves this by using a feedback loop to adjust the output voltage based on the reference voltage.

Detailed Application Field Plans

This voltage regulator is suitable for various battery-powered applications such as portable devices, IoT devices, and handheld instruments. It can also be used in automotive electronics, industrial sensors, and other low-power systems requiring a stable voltage supply.

Detailed and Complete Alternative Models

  • DF6F6.8MT5X: Similar specifications with different package (SOT-23-5)
  • DF5G3.3MTE,LB: Lower dropout voltage, higher output current
  • DF4E5.0MTU,LF: Ultra-low quiescent current, wider operating temperature range

This comprehensive entry provides detailed information about the DF6F6.8MTU,LF voltage regulator, covering its basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

技術ソリューションにおける DF6F6.8MTU,LF の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is DF6F6.8MTU,LF?

    • DF6F6.8MTU,LF is a type of electrical connector commonly used in technical solutions for its high reliability and performance.

  2. What are the key features of DF6F6.8MTU,LF?

    • The key features of DF6F6.8MTU,LF include its compact size, high current-carrying capacity, secure locking mechanism, and suitability for harsh environments.

  3. How is DF6F6.8MTU,LF typically used in technical solutions?

    • DF6F6.8MTU,LF is often used to establish reliable electrical connections in various technical solutions such as industrial machinery, automotive systems, and electronic devices.

  4. What are the advantages of using DF6F6.8MTU,LF in technical solutions?

    • The advantages of using DF6F6.8MTU,LF include its robustness, resistance to vibration and shock, and its ability to maintain stable electrical connections in demanding applications.

  5. Are there any specific considerations when integrating DF6F6.8MTU,LF into technical solutions?

    • It's important to ensure proper mating and alignment of the connectors, as well as considering the environmental conditions and potential EMI/RFI interference in the application.

  6. Can DF6F6.8MTU,LF be used in high-temperature environments?

    • Yes, DF6F6.8MTU,LF is designed to withstand high temperatures, making it suitable for use in applications where heat resistance is required.

  7. What types of cables are compatible with DF6F6.8MTU,LF?

    • DF6F6.8MTU,LF is compatible with various cable types, including shielded and unshielded cables, depending on the specific requirements of the technical solution.

  8. Is DF6F6.8MTU,LF suitable for outdoor applications?

    • Yes, DF6F6.8MTU,LF is designed to be resistant to environmental factors such as moisture and dust, making it suitable for outdoor applications.

  9. What are the recommended maintenance procedures for DF6F6.8MTU,LF in technical solutions?

    • Regular inspection for signs of wear or damage, cleaning of the connectors, and ensuring proper strain relief for the cables are recommended maintenance procedures.

  10. Where can I find technical specifications and installation guidelines for DF6F6.8MTU,LF?

    • Technical specifications and installation guidelines for DF6F6.8MTU,LF can typically be found in the product datasheet provided by the manufacturer or supplier.