XC6124E746MR-G
Product Overview
Category
XC6124E746MR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: XC6124E746MR-G provides a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.
Package
XC6124E746MR-G is available in a small form factor package, making it suitable for space-constrained applications.
Essence
The essence of XC6124E746MR-G lies in its ability to maintain a constant voltage output despite variations in the input voltage.
Packaging/Quantity
This product is typically packaged in reels or tape and reel packaging. The exact quantity may vary depending on the supplier.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 3.3V
- Maximum output current: 100mA
- Dropout voltage: 200mV (at 50mA)
- Quiescent current: 30µA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6124E746MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6124E746MR-G maintains a stable output voltage regardless of input voltage changes.
- Low dropout voltage: It can operate efficiently even with a small difference between input and output voltages.
- Low quiescent current: The regulator consumes minimal current when no load is connected, conserving power.
- Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat, ensuring safety.
Advantages and Disadvantages
Advantages
- Stable voltage output
- Small form factor package
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
Disadvantages
- Limited maximum output current (100mA)
Working Principles
XC6124E746MR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a constant output voltage.
Detailed Application Field Plans
XC6124E746MR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Embedded systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124E746MR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
These models offer similar functionality and specifications, providing options for different design requirements.
Word count: 345 words
技術ソリューションにおける XC6124E746MR-G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of XC6124E746MR-G in technical solutions:
Question: What is XC6124E746MR-G?
- Answer: XC6124E746MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in various technical solutions.Question: What is the purpose of XC6124E746MR-G in technical solutions?
- Answer: The purpose of XC6124E746MR-G is to monitor the voltage level in a circuit and provide an output signal when the voltage falls below or exceeds a certain threshold.Question: What is the operating voltage range of XC6124E746MR-G?
- Answer: XC6124E746MR-G operates within a voltage range of 0.8V to 6.0V.Question: How does XC6124E746MR-G detect voltage levels?
- Answer: XC6124E746MR-G uses an internal voltage reference and comparator to compare the input voltage with a preset threshold. If the voltage crosses the threshold, it triggers the output signal.Question: Can XC6124E746MR-G be used in battery-powered applications?
- Answer: Yes, XC6124E746MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.Question: What is the output configuration of XC6124E746MR-G?
- Answer: XC6124E746MR-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic-level output.Question: What is the typical response time of XC6124E746MR-G?
- Answer: The typical response time of XC6124E746MR-G is 200µs, making it suitable for fast voltage monitoring applications.Question: Can XC6124E746MR-G be used in automotive applications?
- Answer: Yes, XC6124E746MR-G is AEC-Q100 qualified and can be used in automotive applications that require reliable voltage monitoring.Question: Does XC6124E746MR-G have any built-in protection features?
- Answer: Yes, XC6124E746MR-G has built-in overvoltage and undervoltage detection, providing protection against voltage spikes or drops beyond the set thresholds.Question: What package does XC6124E746MR-G come in?
- Answer: XC6124E746MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that these answers are general and may vary depending on the specific application and requirements.