XC6124D645MR-G

Product Overview

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

Package: The XC6124D645MR-G comes in a small SOT-25 package.
Essence: This voltage regulator is designed to provide stable and regulated output voltage.
Packaging/Quantity: It is typically sold in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of XC6124D645MR-G are as follows:

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 4.5V
Output Current: 150mA
Dropout Voltage: 200mV (typical)
Quiescent Current: 30µA (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6124D645MR-G has three pins:

VIN: Input voltage pin
VOUT: Output voltage pin
GND: Ground pin

Functional Features

Low dropout voltage: The XC6124D645MR-G has a low dropout voltage, allowing it to regulate the output voltage even when the input voltage is close to the desired output voltage.
Low quiescent current: It consumes very low current when in standby mode, making it suitable for battery-powered applications.
Short-circuit protection: The voltage regulator has built-in short-circuit protection to prevent damage to the circuit in case of a short circuit.

Advantages and Disadvantages

Advantages: - Small package size - Low dropout voltage - Low quiescent current - Short-circuit protection

Disadvantages: - Limited output current capacity (150mA)

Working Principles

The XC6124D645MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The XC6124D645MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT (Internet of Things) devices - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124D645MR-G are: - XC6204B415MR-G - XC6220B335MR-G - XC6219B315MR-G - XC6206P332MR-G - XC6215B332MR-G

These alternative models have similar specifications and functionalities, providing options for different design requirements.

(Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.)

技術ソリューションにおける XC6124D645MR-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6124D645MR-G in technical solutions:

Question: What is XC6124D645MR-G?
- Answer: XC6124D645MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is used to monitor the voltage level and provide a reset signal when the voltage drops below a certain threshold.
Question: What is the operating voltage range of XC6124D645MR-G?
- Answer: The operating voltage range of XC6124D645MR-G is from 0.6V to 6.0V.
Question: What is the typical supply current of XC6124D645MR-G?
- Answer: The typical supply current of XC6124D645MR-G is 1.5µA.
Question: How does XC6124D645MR-G detect voltage levels?
- Answer: XC6124D645MR-G uses an internal voltage reference and a comparator to monitor the input voltage level.
Question: What is the output type of XC6124D645MR-G?
- Answer: XC6124D645MR-G has an open-drain output, which requires an external pull-up resistor.
Question: What is the typical reset threshold voltage of XC6124D645MR-G?
- Answer: The typical reset threshold voltage of XC6124D645MR-G is 4.5V.
Question: Can XC6124D645MR-G be used for undervoltage detection?
- Answer: Yes, XC6124D645MR-G can be used for undervoltage detection as it provides a reset signal when the voltage drops below the set threshold.
Question: Is XC6124D645MR-G suitable for battery-powered applications?
- Answer: Yes, XC6124D645MR-G is suitable for battery-powered applications as it has a low supply current and wide operating voltage range.
Question: Can XC6124D645MR-G be used in automotive applications?
- Answer: Yes, XC6124D645MR-G is AEC-Q100 qualified and can be used in automotive applications.
Question: What is the package type of XC6124D645MR-G?
- Answer: XC6124D645MR-G is available in a SOT-25 package.

Please note that these answers are based on general information about XC6124D645MR-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and application guidelines.