XC6124D425ER-G
Product Overview
Category
XC6124D425ER-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 4.25V
- Maximum Output Current: 150mA
- Low Dropout Voltage: 100mV at 100mA
- Low Quiescent Current: 30µA (typical)
- Package Type: SOT-23-5
- Operating Temperature Range: -40°C to +85°C
Package and Quantity
XC6124D425ER-G is available in a SOT-23-5 package. It is typically sold in reels or tubes containing multiple units.
Essence
The essence of XC6124D425ER-G is to provide a stable and regulated output voltage for various electronic applications.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 4.25V
- Output Current: Up to 150mA
- Dropout Voltage: 100mV at 100mA
- Quiescent Current: 30µA (typical)
- Line Regulation: ±0.1% (typical)
- Load Regulation: ±0.3% (typical)
- Ripple Rejection Ratio: 70dB (typical)
- Operating Temperature Range: -40°C to +85°C
- Package Type: SOT-23-5
Detailed Pin Configuration
XC6124D425ER-G has a total of five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: NC (No Connection) Pin 4: VOUT (Output Voltage) Pin 5: EN (Enable)
Functional Features
- Low dropout voltage ensures efficient regulation even with low input voltages.
- Low quiescent current minimizes power consumption in standby mode.
- Excellent line and load regulation for stable output voltage under varying conditions.
- High ripple rejection ratio reduces noise interference in the output signal.
- Enable pin allows for easy on/off control of the regulator.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows for flexibility in various applications.
- Low dropout voltage ensures efficient operation even with low input voltages.
- Low quiescent current minimizes power consumption in standby mode.
- Small package size (SOT-23-5) enables space-saving designs.
Disadvantages
- Limited maximum output current (150mA) may not be suitable for high-power applications.
- No adjustable output voltage option available.
Working Principles
XC6124D425ER-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage from a voltage divider network. The pass transistor adjusts its resistance to maintain a constant output voltage, compensating for changes in the input voltage and load conditions.
Detailed Application Field Plans
XC6124D425ER-G can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable audio players - Mobile phones - Digital cameras - Wireless communication modules - IoT devices
Detailed and Complete Alternative Models
Some alternative models to XC6124D425ER-G include: - XC6124C425ER-G: Same specifications, but with a different package (SOT-89-5). - XC6124D425GR-G: Same specifications, but with a different package (DFN2020-6).
These alternative models provide similar functionality and can be used as substitutes depending on the specific requirements of the application.
In conclusion, XC6124D425ER-G is a voltage regulator that offers stable and regulated output voltage for various electronic applications. Its low dropout voltage, low quiescent current, and small package size make it suitable for battery-powered devices and space-constrained designs. However, its limited maximum output current and lack of adjustable output voltage may restrict its use in high-power applications.
技術ソリューションにおける XC6124D425ER-G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of XC6124D425ER-G in technical solutions:
Q: What is XC6124D425ER-G? A: XC6124D425ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6124D425ER-G? A: The operating voltage range of XC6124D425ER-G is from 0.8V to 6.0V.
Q: What is the output type of XC6124D425ER-G? A: XC6124D425ER-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.
Q: What is the typical quiescent current consumption of XC6124D425ER-G? A: The typical quiescent current consumption of XC6124D425ER-G is very low, around 1.0µA.
Q: How does XC6124D425ER-G detect voltage levels? A: XC6124D425ER-G uses a built-in voltage reference and comparator to monitor the input voltage and provide a digital output signal when the voltage crosses a certain threshold.
Q: Can XC6124D425ER-G be used for undervoltage and overvoltage detection? A: Yes, XC6124D425ER-G can be used for both undervoltage and overvoltage detection by setting appropriate threshold voltages using external resistors.
Q: What is the accuracy of voltage detection provided by XC6124D425ER-G? A: The accuracy of voltage detection provided by XC6124D425ER-G is typically ±1.5%.
Q: Can XC6124D425ER-G be used in battery-powered applications? A: Yes, XC6124D425ER-G can be used in battery-powered applications as it has a low quiescent current and wide operating voltage range.
Q: Does XC6124D425ER-G have any built-in protection features? A: Yes, XC6124D425ER-G has built-in hysteresis to prevent output oscillation near the threshold voltage and also includes a power-on reset function.
Q: What package does XC6124D425ER-G come in? A: XC6124D425ER-G is available in a small SOT-25 package, which is suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.