Torex Semiconductor Ltd
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6124D325ER-G
詳細を表示 DataSheets

XC6124D325ER-G

Product Overview

Category

XC6124D325ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • High precision voltage regulation
  • Low power consumption
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124D325ER-G is available in a compact SOT-23-5 package.

Essence

The essence of XC6124D325ER-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6124D325ER-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 100mA (maximum)
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124D325ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6124D325ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the current when it exceeds the specified threshold.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into small electronic devices.
  • High precision voltage regulation ensures reliable performance.
  • Low power consumption helps conserve energy.
  • Wide input voltage range makes it compatible with various power sources.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6124D325ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6124D325ER-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT (Internet of Things) devices - Wearable technology - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124D325ER-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

In conclusion, XC6124D325ER-G is a compact voltage regulator with high precision and low power consumption. Its wide input voltage range and protection features make it suitable for various electronic applications. However, its limited output current capacity and dropout voltage should be considered when selecting the appropriate model for specific projects.

技術ソリューションにおける XC6124D325ER-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6124D325ER-G in technical solutions:

  1. Question: What is XC6124D325ER-G?
    - Answer: XC6124D325ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124D325ER-G?
    - Answer: The operating voltage range of XC6124D325ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124D325ER-G detect voltage levels?
    - Answer: XC6124D325ER-G uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold. When the input voltage drops below the threshold, it triggers an output signal.

  4. Question: What is the output type of XC6124D325ER-G?
    - Answer: XC6124D325ER-G has an open-drain output, which means it can sink current but cannot source current. It requires an external pull-up resistor to provide a logic high level.

  5. Question: What is the typical quiescent current consumption of XC6124D325ER-G?
    - Answer: The typical quiescent current consumption of XC6124D325ER-G is very low, usually around 1.0µA.

  6. Question: Can XC6124D325ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124D325ER-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  7. Question: What is the hysteresis voltage of XC6124D325ER-G?
    - Answer: The hysteresis voltage of XC6124D325ER-G is typically 0.1V, which means the output will remain low until the input voltage rises above the threshold plus the hysteresis voltage.

  8. Question: Can XC6124D325ER-G be used in automotive applications?
    - Answer: Yes, XC6124D325ER-G is AEC-Q100 qualified and suitable for automotive applications, such as monitoring battery voltage or detecting power supply failures.

  9. Question: Does XC6124D325ER-G have any built-in protection features?
    - Answer: Yes, XC6124D325ER-G has built-in overvoltage protection, reverse voltage protection, and thermal shutdown protection to ensure safe operation.

  10. Question: What package does XC6124D325ER-G come in?
    - Answer: XC6124D325ER-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.