Torex Semiconductor Ltd
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6124A245ER-G
詳細を表示 DataSheets

XC6124A245ER-G

Product Overview

Category

XC6124A245ER-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation: XC6124A245ER-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: The regulator consumes minimal current when no load is connected.
  • Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat.

Package

XC6124A245ER-G comes in a small surface-mount package.

Essence

The essence of XC6124A245ER-G lies in its ability to maintain a constant output voltage despite fluctuations in the input voltage.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 2.45V
  • Dropout voltage: 200mV (typical)
  • Quiescent current: 30µA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6124A245ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage Regulation: XC6124A245ER-G maintains a stable output voltage regardless of input voltage variations.
  • Low Dropout Voltage: It can operate efficiently even when the input voltage is only slightly higher than the desired output voltage.
  • Low Quiescent Current: The regulator consumes minimal current when there is no load connected, conserving power.
  • Thermal Shutdown Protection: It has built-in protection that shuts down the regulator in case of excessive heat, preventing damage.

Advantages and Disadvantages

Advantages

  • Provides stable output voltage.
  • Efficient operation with low dropout voltage.
  • Low quiescent current for power conservation.
  • Built-in thermal shutdown protection.

Disadvantages

  • Limited input voltage range (2.5V - 6.0V).
  • Dropout voltage may affect performance in certain applications.

Working Principles

XC6124A245ER-G operates based on a feedback mechanism. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This feedback loop ensures stability and regulation.

Detailed Application Field Plans

XC6124A245ER-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to XC6124A245ER-G include: - XC6124B245ER-G: Similar specifications but with a different output voltage. - XC6124A345ER-G: Higher output voltage variant. - XC6124C245ER-G: Lower dropout voltage variant.

These alternative models provide flexibility in choosing the appropriate voltage regulator for specific application requirements.

Word count: 477 words

技術ソリューションにおける XC6124A245ER-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6124A245ER-G in technical solutions:

  1. Question: What is XC6124A245ER-G?
    - Answer: XC6124A245ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124A245ER-G?
    - Answer: The operating voltage range of XC6124A245ER-G is from 0.8V to 6.0V.

  3. Question: How does XC6124A245ER-G work?
    - Answer: XC6124A245ER-G continuously monitors the input voltage and compares it with a fixed threshold voltage. When the input voltage drops below the threshold, an internal reset signal is generated.

  4. Question: What is the purpose of using XC6124A245ER-G in technical solutions?
    - Answer: XC6124A245ER-G is commonly used as a power supply monitoring device to ensure proper operation and prevent damage to sensitive components in electronic systems.

  5. Question: Can XC6124A245ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124A245ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: Does XC6124A245ER-G have any built-in delay time?
    - Answer: Yes, XC6124A245ER-G has a built-in delay time of typically 200ms to prevent false triggering due to temporary voltage fluctuations.

  7. Question: What is the output configuration of XC6124A245ER-G?
    - Answer: XC6124A245ER-G has an open-drain output configuration, which allows it to be easily interfaced with other digital circuits.

  8. Question: Can XC6124A245ER-G be used in automotive applications?
    - Answer: Yes, XC6124A245ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: What is the temperature range of XC6124A245ER-G?
    - Answer: XC6124A245ER-G has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environments.

  10. Question: Is XC6124A245ER-G available in different package options?
    - Answer: Yes, XC6124A245ER-G is available in various package options, including SOT-25 and USP-6B, providing flexibility for different design requirements.

Please note that these answers are based on general information about XC6124A245ER-G. For specific technical details and application considerations, it is recommended to refer to the datasheet or consult with the manufacturer.