Torex Semiconductor Ltd
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6123F647MR-G
詳細を表示 DataSheets

XC6123F647MR-G

Product Overview

Category

XC6123F647MR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6123F647MR-G is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of XC6123F647MR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable and reliable operation of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or trays, with a quantity of 3000 units per reel/tray.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 0.8V - 5.0V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (active high)

Functional Features

  • Voltage regulation: XC6123F647MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Power management: It efficiently manages power consumption, optimizing energy usage.
  • Enable/disable control: The enable pin allows users to turn the device on/off as needed.

Advantages and Disadvantages

Advantages

  • Compact size enables integration into small electronic devices.
  • High efficiency results in reduced power loss.
  • Wide input and output voltage ranges provide flexibility in various applications.
  • Low quiescent current minimizes power consumption during standby.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

XC6123F647MR-G utilizes a combination of internal circuitry, feedback mechanisms, and control logic to regulate the output voltage. It continuously monitors the input voltage and adjusts the internal circuitry to maintain a stable output voltage within the specified range.

Detailed Application Field Plans

XC6123F647MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

  1. XC6123F647MR-G-XYZ: Similar specifications with minor variations in package size.
  2. XC6123F648MR-G: Higher maximum output current capability.
  3. XC6123F646MR-G: Lower dropout voltage for improved performance in low input voltage scenarios.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 345 words

技術ソリューションにおける XC6123F647MR-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6123F647MR-G in technical solutions:

  1. Question: What is XC6123F647MR-G?
    - Answer: XC6123F647MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6123F647MR-G?
    - Answer: The operating voltage range of XC6123F647MR-G is typically between 0.6V and 6.0V.

  3. Question: How does XC6123F647MR-G work?
    - Answer: XC6123F647MR-G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage drops below the reference voltage, it triggers the output signal.

  4. Question: What is the output type of XC6123F647MR-G?
    - Answer: XC6123F647MR-G has an open-drain output type, which means that it can sink current but cannot source current. An external pull-up resistor is required to pull the output signal high.

  5. Question: What is the typical quiescent current consumption of XC6123F647MR-G?
    - Answer: The typical quiescent current consumption of XC6123F647MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6123F647MR-G be used for battery-powered applications?
    - Answer: Yes, XC6123F647MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  7. Question: What is the hysteresis voltage of XC6123F647MR-G?
    - Answer: The hysteresis voltage of XC6123F647MR-G is typically 0.1V, which means that the output signal will remain low until the input voltage rises above the threshold voltage plus the hysteresis voltage.

  8. Question: Can XC6123F647MR-G be used for overvoltage protection?
    - Answer: No, XC6123F647MR-G is specifically designed as an undervoltage detector and does not provide overvoltage protection functionality.

  9. Question: What is the temperature range of XC6123F647MR-G?
    - Answer: The temperature range of XC6123F647MR-G is typically between -40°C and +85°C.

  10. Question: Are there any application notes or reference designs available for XC6123F647MR-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs on their website that can help in designing circuits using XC6123F647MR-G.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's documentation for XC6123F647MR-G.