XC6123D546MR-G
Product Overview
Category
XC6123D546MR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6123D546MR-G comes in a small surface-mount package.
Essence
The essence of XC6123D546MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
It is typically packaged in reels and available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 1.8V
- Output Current: 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123D546MR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: XC6123D546MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It safeguards the circuit by limiting the current in case of excessive load.
- Thermal shutdown protection: The regulator shuts down if the temperature exceeds a certain threshold, preventing damage due to overheating.
Advantages and Disadvantages
Advantages
- Small form factor allows for space-saving designs.
- High efficiency results in minimal power loss.
- Wide input voltage range makes it compatible with various power sources.
- Overcurrent and thermal shutdown protection enhance circuit reliability.
Disadvantages
- Limited output current capacity (100mA).
- Dropout voltage may cause a slight voltage drop across the regulator.
Working Principles
XC6123D546MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.
Detailed Application Field Plans
XC6123D546MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication modules - Wearable devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123D546MR-G are: - XC6206P182MR - LM1117IMPX-1.8/NOPB - MCP1700T-1802E/TT
These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.
In conclusion, XC6123D546MR-G is a compact voltage regulator with high efficiency and wide input voltage range. It provides stable voltage output, making it suitable for various electronic devices. While it has limitations in terms of output current capacity and dropout voltage, its advantages such as overcurrent and thermal shutdown protection make it a reliable choice for many applications.
技術ソリューションにおける XC6123D546MR-G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of XC6123D546MR-G in technical solutions:
Q: What is XC6123D546MR-G? A: XC6123D546MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring and detecting voltage levels in various electronic devices.
Q: What is the operating voltage range of XC6123D546MR-G? A: The operating voltage range of XC6123D546MR-G is typically between 0.8V and 6.0V.
Q: How does XC6123D546MR-G work? A: XC6123D546MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage exceeds or falls below the reference voltage, it triggers an output signal indicating the voltage level has crossed the threshold.
Q: What is the output type of XC6123D546MR-G? A: XC6123D546MR-G provides an open-drain output, which means it can sink current but cannot source current. This allows for flexibility in connecting to different types of circuits.
Q: What is the typical quiescent current consumption of XC6123D546MR-G? A: The typical quiescent current consumption of XC6123D546MR-G is very low, usually around 1.0µA, making it suitable for battery-powered applications.
Q: Can XC6123D546MR-G be used for overvoltage protection? A: No, XC6123D546MR-G is primarily designed as an undervoltage detection device. It is not intended for overvoltage protection.
Q: What is the accuracy of XC6123D546MR-G? A: The accuracy of XC6123D546MR-G is typically within ±2% of the detection voltage.
Q: Can XC6123D546MR-G be used in automotive applications? A: Yes, XC6123D546MR-G is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.
Q: Is XC6123D546MR-G compatible with both digital and analog circuits? A: Yes, XC6123D546MR-G can be used with both digital and analog circuits due to its open-drain output configuration.
Q: Are there any specific precautions to consider when using XC6123D546MR-G? A: It is important to ensure proper decoupling capacitors are used near the power supply pins of XC6123D546MR-G to minimize noise and stabilize the voltage detection. Additionally, attention should be given to the maximum input voltage limit of 6.0V to prevent damage to the IC.
Please note that the answers provided here are general and may vary depending on the specific application requirements and datasheet specifications of XC6123D546MR-G.