画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6123D420ER-G

XC6123D420ER-G

Product Overview

Category

XC6123D420ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 200mA
  • Low Dropout Voltage: 150mV at 100mA
  • Low Quiescent Current: 30μA (typical)
  • Package Type: DFN2020-6

Package and Quantity

XC6123D420ER-G is packaged in a DFN2020-6 package. It is available in quantities specified by the manufacturer.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV at 100mA
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The XC6123D420ER-G has the following pin configuration:

```


| | --| VIN VOUT |-- --| EN GND |-- |___________| ```

Functional Features

  • Voltage regulation within a specified range
  • Low dropout voltage for efficient power conversion
  • Low quiescent current for power-saving applications
  • Enable pin for controlling the regulator's operation

Advantages

  • Wide input voltage range allows for flexibility in various applications
  • Low dropout voltage ensures efficient power conversion even with low input voltages
  • Low quiescent current minimizes power consumption in standby or idle modes
  • Enable pin provides control over the regulator's operation

Disadvantages

  • Maximum output current of 200mA may limit its use in high-power applications
  • Limited output voltage range may not be suitable for all voltage regulation requirements

Working Principles

XC6123D420ER-G operates based on a voltage regulation principle. It takes an input voltage within the specified range and regulates it to provide a stable output voltage within the specified range. The regulator achieves this by using internal circuitry that adjusts the voltage levels accordingly.

Application Field Plans

XC6123D420ER-G can be used in various electronic devices and circuits where voltage regulation is required. Some potential application fields include: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Embedded systems

Alternative Models

Some alternative models that offer similar functionality to XC6123D420ER-G include: - XC6123D410ER-G - XC6123D430ER-G - XC6123D440ER-G - XC6123D450ER-G

These models have different specifications and may suit specific application requirements better.

In conclusion, XC6123D420ER-G is a voltage regulator with a wide input voltage range, low dropout voltage, and low quiescent current. It is commonly used in various electronic devices and offers advantages such as flexibility, efficiency, and power-saving capabilities. However, it has limitations in terms of maximum output current and limited output voltage range. Alternative models are available to cater to different application needs.

技術ソリューションにおける XC6123D420ER-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6123D420ER-G in technical solutions:

  1. Question: What is XC6123D420ER-G?
    Answer: XC6123D420ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6123D420ER-G?
    Answer: The operating voltage range of XC6123D420ER-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6123D420ER-G?
    Answer: XC6123D420ER-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  4. Question: What is the typical quiescent current consumption of XC6123D420ER-G?
    Answer: The typical quiescent current consumption of XC6123D420ER-G is very low, around 1.0µA.

  5. Question: Can XC6123D420ER-G be used for overvoltage detection?
    Answer: No, XC6123D420ER-G is specifically designed for undervoltage detection. It triggers an output signal when the monitored voltage falls below a certain threshold.

  6. Question: What is the accuracy of the undervoltage detection threshold in XC6123D420ER-G?
    Answer: The accuracy of the undervoltage detection threshold in XC6123D420ER-G is typically ±1.5%.

  7. Question: Can XC6123D420ER-G be used in battery-powered applications?
    Answer: Yes, XC6123D420ER-G is suitable for battery-powered applications due to its low quiescent current consumption.

  8. Question: What is the maximum operating temperature range of XC6123D420ER-G?
    Answer: The maximum operating temperature range of XC6123D420ER-G is from -40°C to +85°C.

  9. Question: Can XC6123D420ER-G be used in automotive applications?
    Answer: Yes, XC6123D420ER-G is AEC-Q100 qualified and can be used in automotive applications that require undervoltage detection.

  10. Question: Does XC6123D420ER-G have any built-in delay function?
    Answer: No, XC6123D420ER-G does not have a built-in delay function. If a delay is required, an external circuit or microcontroller can be used.

Please note that these answers are based on general information about XC6123D420ER-G and may vary depending on specific application requirements.