XC6123A429MR-G
Product Overview
Category
The XC6123A429MR-G belongs to the category of voltage regulators.
Use
It is used to regulate voltage in electronic circuits and devices.
Characteristics
- Low dropout voltage
- Low quiescent current
- High ripple rejection
- Built-in overcurrent protection
Package
The XC6123A429MR-G comes in a small form factor SOT-23 package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage for various electronic applications.
Packaging/Quantity
The XC6123A429MR-G is typically available in reels with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 1.2V to 5.0V (selectable in 0.1V steps)
- Maximum Output Current: 500mA
- Dropout Voltage: 160mV @ 100mA
- Quiescent Current: 30μA
- Ripple Rejection: 70dB @ 1kHz
- Operating Temperature Range: -40°C to 85°C
Detailed Pin Configuration
The XC6123A429MR-G has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. VOUT (Output Voltage)
Functional Features
- Overcurrent Protection: The device includes built-in overcurrent protection, safeguarding the connected circuitry.
- Low Dropout Voltage: Ensures efficient regulation even when the input voltage is close to the output voltage.
- Low Quiescent Current: Minimizes power consumption during standby or idle modes.
- High Ripple Rejection: Filters out input voltage ripples, providing a clean output.
Advantages and Disadvantages
Advantages
- Small form factor
- Wide input voltage range
- Selectable output voltage
- Overcurrent protection
Disadvantages
- Limited maximum output current
- Relatively higher dropout voltage compared to some alternatives
Working Principles
The XC6123A429MR-G operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor to maintain a constant output voltage. When the load changes, the regulator responds by adjusting the pass transistor to ensure a stable output.
Detailed Application Field Plans
The XC6123A429MR-G is suitable for various applications including: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the XC6123A429MR-G include: - XC6206P332MR-G - XC6221B332MR-G - XC6210B182MR-G - LM1117MPX-3.3/NOPB - MCP1700T-3302E/TT
In conclusion, the XC6123A429MR-G is a versatile voltage regulator with a wide input voltage range and low quiescent current, making it suitable for various low-power electronic applications.
[Word count: 411]
技術ソリューションにおける XC6123A429MR-G の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the operating voltage range of XC6123A429MR-G?
- The operating voltage range of XC6123A429MR-G is 0.9V to 6.0V.
What is the typical quiescent current of XC6123A429MR-G?
- The typical quiescent current of XC6123A429MR-G is 0.5μA.
What is the maximum output current of XC6123A429MR-G?
- The maximum output current of XC6123A429MR-G is 300mA.
What is the typical dropout voltage of XC6123A429MR-G?
- The typical dropout voltage of XC6123A429MR-G is 160mV at 100mA.
What are the typical applications for XC6123A429MR-G?
- Typical applications for XC6123A429MR-G include battery-powered devices, portable equipment, and IoT devices.
Does XC6123A429MR-G have built-in overcurrent protection?
- Yes, XC6123A429MR-G has built-in overcurrent protection.
What is the thermal shutdown temperature of XC6123A429MR-G?
- The thermal shutdown temperature of XC6123A429MR-G is approximately 150°C.
Is XC6123A429MR-G available in a SOT-23 package?
- Yes, XC6123A429MR-G is available in a SOT-23 package.
What is the typical line regulation of XC6123A429MR-G?
- The typical line regulation of XC6123A429MR-G is 0.03%/V.
Can XC6123A429MR-G be used in automotive applications?
- Yes, XC6123A429MR-G can be used in automotive applications as it meets AEC-Q100 standards.