XC6122E528MR-G
Product Overview
Category
The XC6122E528MR-G belongs to the category of voltage regulators.
Use
It is used to regulate voltage in electronic circuits and devices.
Characteristics
- Low dropout voltage
- Low quiescent current
- High ripple rejection
- Built-in overcurrent protection
Package
The XC6122E528MR-G comes in a small form factor SOT-23-5 package.
Essence
This voltage regulator is essential for maintaining stable voltage levels in various electronic applications.
Packaging/Quantity
The XC6122E528MR-G is typically available in reels with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 2.8V
- Maximum Output Current: 500mA
- Dropout Voltage: 160mV @ 100mA
- Quiescent Current: 30µA
- Ripple Rejection: 70dB @ 1kHz
- Operating Temperature Range: -40°C to 85°C
Detailed Pin Configuration
The XC6122E528MR-G has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. EN (Enable)
Functional Features
- Overcurrent Protection: The device includes built-in overcurrent protection, safeguarding the connected circuitry.
- Low Dropout Voltage: Ensures efficient regulation even when the input voltage is only slightly higher than the output voltage.
- Low Quiescent Current: Minimizes power consumption during standby or idle modes.
- High Ripple Rejection: Filters out high-frequency noise from the input supply, providing a clean output voltage.
Advantages and Disadvantages
Advantages
- Small form factor
- Wide input voltage range
- Excellent load regulation
Disadvantages
- Limited maximum output current
- Sensitive to thermal conditions
Working Principles
The XC6122E528MR-G operates by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a constant output voltage despite variations in the input voltage and load conditions.
Detailed Application Field Plans
The XC6122E528MR-G is suitable for various applications including: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable technology - Embedded systems
Detailed and Complete Alternative Models
Some alternative models to the XC6122E528MR-G include: - XC6206P282MR - XC6221B282MR - XC6210B282MR - XC6223B282MR
In conclusion, the XC6122E528MR-G is a versatile voltage regulator with a wide range of applications, offering efficient voltage regulation and protection features in a compact package.
[Word Count: 443]
技術ソリューションにおける XC6122E528MR-G の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the operating voltage range of XC6122E528MR-G?
- The operating voltage range of XC6122E528MR-G is 1.2V to 6.0V.
What is the typical quiescent current of XC6122E528MR-G?
- The typical quiescent current of XC6122E528MR-G is 0.5µA.
What is the maximum output current of XC6122E528MR-G?
- The maximum output current of XC6122E528MR-G is 250mA.
What is the dropout voltage of XC6122E528MR-G?
- The dropout voltage of XC6122E528MR-G is typically 160mV at 100mA.
What are the typical applications for XC6122E528MR-G?
- Typical applications for XC6122E528MR-G include battery-powered devices, portable equipment, and power management in various electronic devices.
Does XC6122E528MR-G have built-in overcurrent protection?
- Yes, XC6122E528MR-G has built-in overcurrent protection.
What is the thermal shutdown temperature of XC6122E528MR-G?
- The thermal shutdown temperature of XC6122E528MR-G is typically 150°C.
Is XC6122E528MR-G available in a SOT-23 package?
- Yes, XC6122E528MR-G is available in a SOT-23 package.
What is the typical line regulation of XC6122E528MR-G?
- The typical line regulation of XC6122E528MR-G is 0.2% (ΔVOUT/VIN).
Can XC6122E528MR-G be used in automotive applications?
- Yes, XC6122E528MR-G can be used in automotive applications as it meets AEC-Q100 standards.