Torex Semiconductor Ltd
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6122D328MR-G
詳細を表示 DataSheets

XC6122D328MR-G

Product Overview

Category

XC6122D328MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • High output voltage accuracy
  • Low quiescent current
  • Thermal shutdown protection
  • Short circuit current limit

Package

XC6122D328MR-G comes in a small form factor package, such as SOT-23-5.

Essence

The essence of XC6122D328MR-G is to provide a stable and regulated voltage supply to electronic devices.

Packaging/Quantity

It is typically available in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Dropout Voltage: 150mV @ 100mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122D328MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • High output voltage accuracy provides precise voltage regulation.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection prevents overheating.
  • Short circuit current limit protects the device from excessive current.

Advantages and Disadvantages

Advantages

  • Small form factor package allows for space-saving designs.
  • Wide input voltage range enables compatibility with various power sources.
  • Excellent voltage regulation accuracy ensures reliable performance.
  • Low quiescent current extends battery life in portable applications.

Disadvantages

  • Limited output current capability may not be suitable for high-power applications.
  • Thermal shutdown protection may cause temporary shutdown in extreme temperature conditions.

Working Principles

XC6122D328MR-G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The feedback mechanism continuously compares the output voltage with a reference voltage, making necessary adjustments to maintain a stable output voltage.

Detailed Application Field Plans

XC6122D328MR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Embedded systems - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122D328MR-G are: - LM1117-3.3 - MCP1700-3302E/TO - AP2112K-3.3TRG1 - TPS78233DDCR - LP2985-33DBVR

These models offer similar functionality and specifications, providing options for different design requirements.

Word count: 388 words

技術ソリューションにおける XC6122D328MR-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6122D328MR-G in technical solutions:

  1. Question: What is XC6122D328MR-G?
    - Answer: XC6122D328MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122D328MR-G?
    - Answer: The operating voltage range of XC6122D328MR-G is from 0.8V to 6.0V.

  3. Question: How does XC6122D328MR-G work?
    - Answer: XC6122D328MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or rises above the reference voltage, it triggers an output signal.

  4. Question: What is the output type of XC6122D328MR-G?
    - Answer: XC6122D328MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.

  5. Question: What is the typical quiescent current of XC6122D328MR-G?
    - Answer: The typical quiescent current of XC6122D328MR-G is around 1.0µA, making it suitable for low-power applications.

  6. Question: Can XC6122D328MR-G be used for overvoltage protection?
    - Answer: No, XC6122D328MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.

  7. Question: What is the accuracy of the voltage detection threshold in XC6122D328MR-G?
    - Answer: The accuracy of the voltage detection threshold in XC6122D328MR-G is typically ±1.5%.

  8. Question: Can XC6122D328MR-G be used in automotive applications?
    - Answer: Yes, XC6122D328MR-G is AEC-Q100 qualified and suitable for automotive applications.

  9. Question: What is the temperature range of XC6122D328MR-G?
    - Answer: XC6122D328MR-G has an operating temperature range of -40°C to +85°C.

  10. Question: Is XC6122D328MR-G available in different package options?
    - Answer: Yes, XC6122D328MR-G is available in a SOT-25 package, which is a small surface-mount package commonly used in electronic devices.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.