画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6122C350ER-G

XC6122C350ER-G

Product Overview

Category

XC6122C350ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6122C350ER-G comes in a small SOT-23-5 package.
  • Essence: This voltage regulator is designed to provide stable and regulated output voltage.
  • Packaging/Quantity: It is typically sold in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of XC6122C350ER-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 3.5V
  • Output Current: 200mA (maximum)
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6122C350ER-G has five pins arranged as follows:

```


| | --| |-- |____| ```

Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: EN (Enable) Pin 4: NC (No Connection) Pin 5: VOUT (Output Voltage)

Functional Features

  • Low Dropout Voltage: The XC6122C350ER-G exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: With a low quiescent current, this voltage regulator minimizes power consumption when the load is light.
  • Thermal Shutdown Protection: The device incorporates thermal shutdown protection, preventing damage due to excessive temperature.

Advantages and Disadvantages

Advantages: - Compact package size - Low dropout voltage - Low quiescent current - Thermal shutdown protection

Disadvantages: - Limited output current capacity (200mA maximum)

Working Principles

The XC6122C350ER-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The XC6122C350ER-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to XC6122C350ER-G are: - XC6122C350ER-G-1: Same specifications, but with an extended temperature range (-40°C to +105°C) - XC6122C300ER-G: Lower output voltage variant (3.0V) - XC6122C500ER-G: Higher output voltage variant (5.0V)

These alternative models provide flexibility in choosing the desired output voltage and operating temperature range.

In conclusion, the XC6122C350ER-G is a compact and efficient voltage regulator suitable for various electronic applications. Its low dropout voltage, low quiescent current, and thermal shutdown protection make it an ideal choice for power regulation needs.

技術ソリューションにおける XC6122C350ER-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6122C350ER-G in technical solutions:

  1. Question: What is XC6122C350ER-G?
    - Answer: XC6122C350ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122C350ER-G?
    - Answer: The operating voltage range of XC6122C350ER-G is from 0.7V to 6.0V.

  3. Question: How does XC6122C350ER-G work?
    - Answer: XC6122C350ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal indicating a low voltage condition.

  4. Question: What is the typical quiescent current consumption of XC6122C350ER-G?
    - Answer: The typical quiescent current consumption of XC6122C350ER-G is very low, usually around 1.0µA.

  5. Question: Can XC6122C350ER-G be used in battery-powered applications?
    - Answer: Yes, XC6122C350ER-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.

  6. Question: What is the output configuration of XC6122C350ER-G?
    - Answer: XC6122C350ER-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic high level when the output is not active.

  7. Question: What is the maximum voltage that XC6122C350ER-G can tolerate on its input pin?
    - Answer: The maximum voltage that XC6122C350ER-G can tolerate on its input pin is 6.5V.

  8. Question: Can XC6122C350ER-G be used for overvoltage protection?
    - Answer: No, XC6122C350ER-G is primarily designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: What is the typical response time of XC6122C350ER-G?
    - Answer: The typical response time of XC6122C350ER-G is around 200µs.

  10. Question: Is XC6122C350ER-G RoHS compliant?
    - Answer: Yes, XC6122C350ER-G is RoHS (Restriction of Hazardous Substances) compliant, which means it meets the environmental standards set by the European Union.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.