画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6121F647MR-G

XC6121F647MR-G

Product Overview

Category

XC6121F647MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6121F647MR-G comes in a small surface-mount package.
  • Essence: This voltage regulator provides stable and reliable voltage output.
  • Packaging/Quantity: It is typically packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

The specifications of XC6121F647MR-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The detailed pin configuration of XC6121F647MR-G is as follows:

```


| | --| VIN VOUT |-- --| GND EN |-- |___________| ```

  • VIN: Input voltage pin
  • VOUT: Output voltage pin
  • GND: Ground pin
  • EN: Enable pin (active high)

Functional Features

  • Low dropout voltage: The XC6121F647MR-G has a low dropout voltage, allowing it to regulate voltage efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: It consumes very low current when in standby mode, making it suitable for battery-powered applications.
  • Short-circuit protection: The voltage regulator is equipped with short-circuit protection, preventing damage to the circuit in case of a short circuit.

Advantages and Disadvantages

Advantages

  • Stable and reliable voltage output
  • Low dropout voltage
  • Low quiescent current
  • Short-circuit protection

Disadvantages

  • Limited maximum output current (150mA)

Working Principles

The XC6121F647MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The XC6121F647MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT devices - Consumer electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6121F647MR-G are: - XC6121F647ML-G - XC6121F647NR-G - XC6121F647PR-G - XC6121F647QR-G

These alternative models have similar specifications and features, providing flexibility in choosing the most suitable voltage regulator for specific applications.

In conclusion, the XC6121F647MR-G is a voltage regulator with stable and reliable voltage output, low dropout voltage, and low quiescent current. It is commonly used in various electronic applications and has several alternative models available.

技術ソリューションにおける XC6121F647MR-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6121F647MR-G in technical solutions:

Q1: What is XC6121F647MR-G? A1: XC6121F647MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

Q2: What is the operating voltage range of XC6121F647MR-G? A2: The operating voltage range of XC6121F647MR-G is from 0.8V to 6.0V.

Q3: What is the output type of XC6121F647MR-G? A3: XC6121F647MR-G has an open-drain output type.

Q4: What is the typical quiescent current consumption of XC6121F647MR-G? A4: The typical quiescent current consumption of XC6121F647MR-G is 1.0µA.

Q5: What is the detection voltage accuracy of XC6121F647MR-G? A5: The detection voltage accuracy of XC6121F647MR-G is ±1.0%.

Q6: Can XC6121F647MR-G be used for overvoltage detection? A6: No, XC6121F647MR-G is specifically designed for undervoltage detection only.

Q7: What is the maximum reset time delay of XC6121F647MR-G? A7: The maximum reset time delay of XC6121F647MR-G is typically 200ms.

Q8: Is XC6121F647MR-G suitable for automotive applications? A8: Yes, XC6121F647MR-G is AEC-Q100 qualified and can be used in automotive applications.

Q9: Does XC6121F647MR-G have built-in hysteresis? A9: Yes, XC6121F647MR-G has a built-in hysteresis of typically 2.5%.

Q10: What is the package type of XC6121F647MR-G? A10: XC6121F647MR-G is available in a small SOT-25 package.

Please note that these answers are based on general information and it's always recommended to refer to the datasheet or consult with the manufacturer for specific details and application requirements.