XC6121E632ER-G
Product Overview
Category
XC6121E632ER-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize voltage levels.
Characteristics
- Voltage regulation: XC6121E632ER-G provides precise voltage regulation, ensuring a stable power supply for electronic devices.
- Low dropout voltage: It has a low dropout voltage, allowing it to operate efficiently even when the input voltage is close to the output voltage.
- Low quiescent current: The regulator consumes minimal current when there is no load, making it suitable for battery-powered applications.
- Thermal shutdown protection: It incorporates thermal shutdown protection to prevent overheating and damage to the device.
- Short-circuit protection: XC6121E632ER-G includes short-circuit protection to safeguard against excessive current flow.
Package
XC6121E632ER-G is available in a small surface-mount package, typically a SOT-23-5 package.
Essence
The essence of XC6121E632ER-G lies in its ability to provide stable and regulated voltage output for various electronic applications.
Packaging/Quantity
It is usually packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage options: 1.2V, 1.8V, 2.5V, 3.3V, 5.0V
- Output current: Up to 200mA
- Dropout voltage: 150mV (typical)
- Quiescent current: 30µA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6121E632ER-G has a total of five pins:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin (active high)
- VOUT: Output voltage pin
- CE: Capacitor connection pin for stability
Functional Features
- Voltage regulation: XC6121E632ER-G maintains a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It can operate efficiently even when the input voltage is close to the desired output voltage.
- Thermal shutdown protection: The regulator shuts down if the temperature exceeds a certain threshold, preventing damage.
- Short-circuit protection: It safeguards against excessive current flow in case of a short circuit.
Advantages and Disadvantages
Advantages
- Precise voltage regulation
- Low dropout voltage
- Low quiescent current consumption
- Thermal and short-circuit protection
Disadvantages
- Limited output current capacity (up to 200mA)
Working Principles
XC6121E632ER-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.
Detailed Application Field Plans
XC6121E632ER-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6121E632ER-G include: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
技術ソリューションにおける XC6121E632ER-G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of XC6121E632ER-G in technical solutions:
Q1: What is XC6121E632ER-G? A1: XC6121E632ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q2: What is the operating voltage range of XC6121E632ER-G? A2: The operating voltage range of XC6121E632ER-G is typically between 0.8V and 6.0V.
Q3: How does XC6121E632ER-G work? A3: XC6121E632ER-G works by continuously monitoring the input voltage and comparing it with a reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal to indicate the status.
Q4: What is the purpose of using XC6121E632ER-G in technical solutions? A4: XC6121E632ER-G is commonly used as a voltage supervisor or reset generator in technical solutions to ensure proper operation and prevent damage caused by unstable or out-of-range power supply voltages.
Q5: Can XC6121E632ER-G be used in battery-powered applications? A5: Yes, XC6121E632ER-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q6: What is the output type of XC6121E632ER-G? A6: XC6121E632ER-G provides an active-low open-drain output, which means it can sink current when triggered.
Q7: Is XC6121E632ER-G capable of generating a reset signal? A7: Yes, XC6121E632ER-G can generate a reset signal when the input voltage falls below the specified threshold. This reset signal can be used to initialize or restart the system.
Q8: What is the typical accuracy of the voltage detection in XC6121E632ER-G? A8: The typical accuracy of voltage detection in XC6121E632ER-G is ±2%.
Q9: Can XC6121E632ER-G be used in automotive applications? A9: Yes, XC6121E632ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q10: Are there any additional features or protections provided by XC6121E632ER-G? A10: Yes, XC6121E632ER-G includes features like hysteresis, which helps to prevent output oscillation near the threshold voltage, and overcurrent protection to safeguard against excessive current flow.
Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.