Torex Semiconductor Ltd
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6118C34BGR-G
詳細を表示 DataSheets

XC6118C34BGR-G

Product Overview

Category

XC6118C34BGR-G belongs to the category of voltage regulators.

Use

It is commonly used as a power management solution in electronic devices.

Characteristics

  • Voltage regulation capability
  • Low dropout voltage
  • High accuracy
  • Thermal shutdown protection
  • Overcurrent protection

Package

XC6118C34BGR-G is available in a small form factor package, typically SOT-23.

Essence

The essence of XC6118C34BGR-G lies in its ability to regulate and stabilize voltage levels within electronic circuits.

Packaging/Quantity

Typically, XC6118C34BGR-G is packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.4V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 150mA (maximum)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118C34BGR-G has three pins:

  1. VIN (Input Voltage): Connects to the input voltage source.
  2. VOUT (Output Voltage): Connects to the output load.
  3. GND (Ground): Common reference point for the regulator.

Functional Features

  • Voltage Regulation: Maintains a stable output voltage regardless of input voltage fluctuations.
  • Low Dropout Voltage: Minimizes power loss across the regulator.
  • Thermal Shutdown Protection: Prevents damage due to excessive temperature.
  • Overcurrent Protection: Safeguards against excessive current flow.

Advantages and Disadvantages

Advantages

  • High accuracy in voltage regulation
  • Compact size for space-constrained applications
  • Low quiescent current consumption
  • Thermal and overcurrent protection enhance reliability

Disadvantages

  • Limited output current capacity (150mA maximum)
  • Restricted input voltage range (2.5V - 6.0V)

Working Principles

XC6118C34BGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The regulator continuously monitors the input voltage, adjusting its internal components to ensure the desired output voltage is maintained.

Detailed Application Field Plans

XC6118C34BGR-G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118C34BGR-G are: - LM1117-3.3 - MCP1700-3302E/TO - LP2985-33DBVR - AP2112K-3.3TRG1 - TPS73633DBVR

These alternatives offer similar voltage regulation capabilities and may vary in terms of package type, dropout voltage, and other specifications.

Word count: 320 words

技術ソリューションにおける XC6118C34BGR-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6118C34BGR-G in technical solutions:

  1. Q: What is XC6118C34BGR-G? A: XC6118C34BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C34BGR-G? A: The operating voltage range of XC6118C34BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118C34BGR-G help in technical solutions? A: XC6118C34BGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: What is the typical reset voltage threshold of XC6118C34BGR-G? A: The typical reset voltage threshold of XC6118C34BGR-G is 3.4V.

  5. Q: Can XC6118C34BGR-G be used in battery-powered applications? A: Yes, XC6118C34BGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  6. Q: Does XC6118C34BGR-G have any built-in delay for the reset signal? A: Yes, XC6118C34BGR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.

  7. Q: Is XC6118C34BGR-G suitable for automotive applications? A: Yes, XC6118C34BGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards.

  8. Q: Can XC6118C34BGR-G be used in industrial control systems? A: Absolutely, XC6118C34BGR-G can be used in industrial control systems to ensure proper reset functionality and system stability.

  9. Q: What is the package type of XC6118C34BGR-G? A: XC6118C34BGR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

  10. Q: Where can I find more information about XC6118C34BGR-G? A: You can find more detailed information about XC6118C34BGR-G in the datasheet provided by the manufacturer or by contacting their technical support team.