XC6118C25DGR-G
Product Overview
Category
XC6118C25DGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Package: DFN (Dual Flat No-Lead)
- Essence: Low dropout voltage regulator
- Packaging/Quantity: Tape and reel, 3000 pieces per reel
Specifications
The specifications of XC6118C25DGR-G are as follows:
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 2.5V
- Dropout Voltage: 200mV @ 100mA
- Output Current: 100mA
- Quiescent Current: 30µA
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6118C25DGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
The functional features of XC6118C25DGR-G include:
- Low dropout voltage: The regulator maintains a stable output voltage even when the input voltage is close to the desired output voltage.
- Low quiescent current: It consumes minimal current when there is no load, making it suitable for battery-powered applications.
- Thermal shutdown protection: The regulator automatically shuts down if the temperature exceeds the specified limit, preventing damage to the device.
- Short-circuit protection: It safeguards against excessive current flow by shutting down the output in case of a short circuit.
Advantages and Disadvantages
Advantages: - Compact package size - Wide operating temperature range - Low dropout voltage - Low quiescent current
Disadvantages: - Limited output current capacity - Single output voltage option
Working Principles
XC6118C25DGR-G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The regulator compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
XC6118C25DGR-G finds applications in various electronic devices, including but not limited to: 1. Portable consumer electronics 2. Battery-powered devices 3. IoT (Internet of Things) devices 4. Wearable devices 5. Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118C25DGR-G are: 1. LM1117-2.5: Low dropout voltage regulator with 2.5V output 2. MCP1700-250: Low quiescent current voltage regulator with 2.5V output 3. TS2950CT-2.5: Low dropout voltage regulator with 2.5V output and thermal shutdown protection
These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.
In conclusion, XC6118C25DGR-G is a voltage regulator with low dropout voltage and low quiescent current. It is commonly used in various electronic devices to provide stable and regulated power supply. Its compact package size and wide operating temperature range make it suitable for a range of applications. However, its limited output current capacity and single output voltage option should be taken into consideration when selecting the appropriate voltage regulator for a specific application.
技術ソリューションにおける XC6118C25DGR-G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of XC6118C25DGR-G in technical solutions:
Q: What is XC6118C25DGR-G? A: XC6118C25DGR-G is a voltage detector IC (integrated circuit) with a fixed threshold voltage of 2.5V.
Q: What is the typical operating voltage range for XC6118C25DGR-G? A: The typical operating voltage range for XC6118C25DGR-G is between 0.9V and 6.0V.
Q: How does XC6118C25DGR-G work? A: XC6118C25DGR-G monitors the input voltage and outputs a signal when the voltage drops below the fixed threshold voltage of 2.5V.
Q: What is the purpose of using XC6118C25DGR-G in a technical solution? A: XC6118C25DGR-G is commonly used as a power supply monitoring device to detect low voltage conditions and trigger appropriate actions or alarms.
Q: Can XC6118C25DGR-G be used in battery-powered applications? A: Yes, XC6118C25DGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: Is XC6118C25DGR-G suitable for automotive applications? A: Yes, XC6118C25DGR-G is suitable for automotive applications as it meets the required specifications for temperature range, voltage stability, and reliability.
Q: Can XC6118C25DGR-G be used in industrial control systems? A: Absolutely, XC6118C25DGR-G is commonly used in industrial control systems to monitor power supply voltages and ensure stable operation.
Q: What are the available package options for XC6118C25DGR-G? A: XC6118C25DGR-G is available in a SOT-89-3 package, which is a small surface-mount package with three pins.
Q: Does XC6118C25DGR-G have any built-in protection features? A: Yes, XC6118C25DGR-G has built-in overcurrent protection and thermal shutdown features to protect against abnormal operating conditions.
Q: Can XC6118C25DGR-G be used in space-constrained applications? A: Yes, XC6118C25DGR-G is suitable for space-constrained applications due to its compact package size and low power consumption.
Please note that these answers are general and may vary depending on specific application requirements.