XC6108N41AGR-G
Product Overview
Category
XC6108N41AGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation capability
- Low dropout voltage
- High accuracy
- Thermal shutdown protection
- Overcurrent protection
Package
XC6108N41AGR-G is available in a small surface-mount package, typically SOT-23-5.
Essence
The essence of XC6108N41AGR-G lies in its ability to provide stable and regulated voltage output for electronic devices.
Packaging/Quantity
XC6108N41AGR-G is usually packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer's specifications.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.1V
- Dropout Voltage: 200mV (typical)
- Output Current: 150mA (maximum)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6108N41AGR-G has five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: Enable (EN) Pin 2: Ground (GND) Pin 3: Feedback (FB) Pin 4: Not Connected (NC) Pin 5: Output (OUT)
Functional Features
- Voltage regulation: XC6108N41AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.
- Overcurrent protection: It safeguards the circuit by limiting the output current in case of a short circuit or overload.
Advantages and Disadvantages
Advantages
- High accuracy in voltage regulation
- Low quiescent current consumption
- Compact size and easy integration into electronic circuits
- Thermal and overcurrent protection enhance reliability
Disadvantages
- Limited maximum output current (150mA)
- Restricted input voltage range (2.5V - 6.0V)
Working Principles
XC6108N41AGR-G operates based on the principle of feedback control. The feedback pin (FB) monitors the output voltage and compares it with a reference voltage. If the output voltage deviates from the desired value, the internal circuitry adjusts the pass transistor to maintain the correct output voltage.
Detailed Application Field Plans
XC6108N41AGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108N41AGR-G are: - LM1117-4.1 - MCP1703-4102E/TO - LP2985-4.1
These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.
Word count: 369 words
技術ソリューションにおける XC6108N41AGR-G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of XC6108N41AGR-G in technical solutions:
Q: What is XC6108N41AGR-G? A: XC6108N41AGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.
Q: What is the operating voltage range of XC6108N41AGR-G? A: The operating voltage range of XC6108N41AGR-G is typically between 0.7V and 6.0V.
Q: How does XC6108N41AGR-G work? A: XC6108N41AGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.
Q: What is the typical reset threshold voltage of XC6108N41AGR-G? A: The typical reset threshold voltage of XC6108N41AGR-G is 4.1V.
Q: Can XC6108N41AGR-G be used in battery-powered applications? A: Yes, XC6108N41AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Is XC6108N41AGR-G suitable for automotive applications? A: Yes, XC6108N41AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Does XC6108N41AGR-G have built-in delay time for the reset signal? A: Yes, XC6108N41AGR-G has a built-in delay time of typically 200ms to prevent false resets during power fluctuations.
Q: Can XC6108N41AGR-G be used in high-temperature environments? A: Yes, XC6108N41AGR-G has an operating temperature range of -40°C to +125°C, making it suitable for high-temperature environments.
Q: What is the package type of XC6108N41AGR-G? A: XC6108N41AGR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.
Q: Are there any application notes or reference designs available for XC6108N41AGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help in the implementation of XC6108N41AGR-G in various technical solutions.
Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of XC6108N41AGR-G.