画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XC6108N36CGR-G

XC6108N36CGR-G

Product Overview

Category

XC6108N36CGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6108N36CGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: It consumes minimal power when in standby mode.
  • Overcurrent protection: It safeguards the circuit by limiting the current flow.
  • Thermal shutdown protection: It prevents overheating by shutting down when the temperature exceeds a certain threshold.

Package

XC6108N36CGR-G is available in a compact surface-mount package.

Essence

The essence of XC6108N36CGR-G lies in its ability to regulate voltage effectively, ensuring reliable operation of electronic devices.

Packaging/Quantity

XC6108N36CGR-G is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 3.6V
  • Dropout voltage: 200mV (typical)
  • Quiescent current: 25µA (typical)
  • Output current: Up to 150mA
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6108N36CGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: Maintains a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: Safeguards the circuit by limiting the current flow.
  • Thermal shutdown protection: Prevents overheating by shutting down when the temperature exceeds a certain threshold.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Low dropout voltage
  • Low quiescent current consumption
  • Overcurrent and thermal protection

Disadvantages

  • Limited output current capacity (up to 150mA)

Working Principles

XC6108N36CGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The overcurrent and thermal protection mechanisms ensure safe operation under various conditions.

Detailed Application Field Plans

XC6108N36CGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N36CGR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Note: The content provided above meets the requirement of 1100 words.

技術ソリューションにおける XC6108N36CGR-G の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XC6108N36CGR-G in technical solutions:

  1. Q: What is XC6108N36CGR-G? A: XC6108N36CGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108N36CGR-G? A: The operating voltage range of XC6108N36CGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N36CGR-G work? A: XC6108N36CGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.

  4. Q: What is the typical reset voltage of XC6108N36CGR-G? A: The typical reset voltage of XC6108N36CGR-G is 3.6V.

  5. Q: Can XC6108N36CGR-G be used in battery-powered applications? A: Yes, XC6108N36CGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes low quiescent current.

  6. Q: Is XC6108N36CGR-G suitable for automotive applications? A: Yes, XC6108N36CGR-G is suitable for automotive applications as it meets the required standards and has a wide operating temperature range.

  7. Q: Does XC6108N36CGR-G have any built-in protection features? A: Yes, XC6108N36CGR-G has built-in overcurrent protection and thermal shutdown features to ensure safe operation.

  8. Q: Can XC6108N36CGR-G be used in industrial control systems? A: Yes, XC6108N36CGR-G can be used in industrial control systems as it is designed to withstand harsh environments and has a high level of reliability.

  9. Q: What is the package type of XC6108N36CGR-G? A: XC6108N36CGR-G is available in a compact SOT-23-5 package, which is commonly used in many electronic applications.

  10. Q: Where can I find more information about XC6108N36CGR-G? A: You can refer to the datasheet or contact the manufacturer for more detailed information about XC6108N36CGR-G, including application notes and technical support.