Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
UCC3818ADRG4
詳細を表示 DataSheets

UCC3818ADRG4

Overview

Category: Integrated Circuit (IC)

Use: Voltage Mode PWM Controller

Characteristics: - High-performance voltage mode pulse width modulation (PWM) controller - Designed for use in switch-mode power supplies - Provides precise control of the output voltage and current - Offers protection features such as overvoltage and overcurrent protection - Enables efficient power conversion

Package: SOIC-8 (Small Outline Integrated Circuit)

Essence: UCC3818ADRG4 is a voltage mode PWM controller that plays a crucial role in regulating the output voltage and current in switch-mode power supplies. It ensures efficient power conversion while providing protection against overvoltage and overcurrent conditions.

Packaging/Quantity: The UCC3818ADRG4 is available in a standard SOIC-8 package. It is typically sold in reels or tubes containing multiple units.

Specifications

  • Input Voltage Range: 10V to 30V
  • Output Voltage Range: 0V to 5V
  • Operating Temperature Range: -40°C to +85°C
  • Switching Frequency: 100kHz to 1MHz
  • Maximum Duty Cycle: 90%
  • Supply Current: 3mA (typical)
  • Error Amplifier Gain Bandwidth Product: 2MHz (typical)

Pin Configuration

The UCC3818ADRG4 has the following pin configuration:

___________ | | NC |1 8| VCC FB |2 7| COMP CS |3 6| GND RT |4 5| CT |___________|

  1. NC: No Connection
  2. FB: Feedback Pin
  3. CS: Current Sense Pin
  4. RT: Timing Resistor Pin
  5. CT: Timing Capacitor Pin
  6. GND: Ground Pin
  7. COMP: Compensation Pin
  8. VCC: Supply Voltage Pin

Functional Features

  • Voltage mode control for precise regulation of output voltage and current
  • Error amplifier with high gain bandwidth product for accurate feedback control
  • Adjustable switching frequency to optimize power conversion efficiency
  • Overvoltage protection to prevent damage to the load
  • Overcurrent protection to safeguard against excessive current flow
  • Soft-start function to reduce inrush current during startup
  • External compensation pin for stability optimization

Advantages and Disadvantages

Advantages: - Precise control of output voltage and current - Efficient power conversion - Protection against overvoltage and overcurrent conditions - Soft-start function reduces inrush current - External compensation for stability optimization

Disadvantages: - Limited input voltage range (10V to 30V) - Restricted output voltage range (0V to 5V) - Operating temperature range (-40°C to +85°C)

Working Principles

The UCC3818ADRG4 operates based on the voltage mode control technique. It compares the actual output voltage with a reference voltage and adjusts the duty cycle of the PWM signal accordingly. By modulating the duty cycle, it regulates the power delivered to the load.

The error amplifier amplifies the difference between the reference voltage and the feedback voltage from the output. This amplified error signal is then compared with a sawtooth waveform generated by the internal oscillator. The resulting PWM signal controls the switching of the power MOSFETs in the power supply circuit.

The UCC3818ADRG4 also incorporates protection features such as overvoltage and overcurrent protection. These safeguards ensure that the output voltage and current remain within safe limits, preventing damage to the load or the controller itself.

Detailed Application Field Plans

The UCC3818ADRG4 is widely used in various applications, including:

  1. Switch-mode power supplies for computers, telecommunication equipment, and industrial machinery
  2. LED lighting systems
  3. Battery charging circuits
  4. Motor control circuits
  5. Audio amplifiers
  6. DC-DC converters

Detailed and Complete Alternative Models

  1. UCC3818ADR: Similar voltage mode PWM controller with a different package (SOIC-14)
  2. UC3842AN: Voltage mode PWM controller with similar features but a wider input voltage range (8V to 30V)
  3. TL494CN: PWM controller with adjustable switching frequency and additional features such as dead-time control and shutdown function

These alternative models can be considered based on specific requirements and compatibility with the application.

Word count: 615 words

技術ソリューションにおける UCC3818ADRG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of UCC3818ADRG4 in technical solutions:

  1. Q: What is UCC3818ADRG4? A: UCC3818ADRG4 is a voltage mode PWM controller IC used in power supply applications.

  2. Q: What is the operating voltage range of UCC3818ADRG4? A: The operating voltage range of UCC3818ADRG4 is typically between 3V and 20V.

  3. Q: What is the maximum switching frequency supported by UCC3818ADRG4? A: UCC3818ADRG4 supports a maximum switching frequency of up to 1MHz.

  4. Q: Can UCC3818ADRG4 be used in both buck and boost converter topologies? A: Yes, UCC3818ADRG4 can be used in both buck and boost converter topologies.

  5. Q: Does UCC3818ADRG4 have built-in protection features? A: Yes, UCC3818ADRG4 has built-in protection features such as overcurrent protection and thermal shutdown.

  6. Q: What is the typical output current capability of UCC3818ADRG4? A: The typical output current capability of UCC3818ADRG4 is around 1A.

  7. Q: Can UCC3818ADRG4 operate in a wide temperature range? A: Yes, UCC3818ADRG4 can operate in a wide temperature range, typically from -40°C to 125°C.

  8. Q: Is UCC3818ADRG4 suitable for battery-powered applications? A: Yes, UCC3818ADRG4 is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  9. Q: Does UCC3818ADRG4 require an external compensation network? A: Yes, UCC3818ADRG4 requires an external compensation network for stability in the control loop.

  10. Q: What package options are available for UCC3818ADRG4? A: UCC3818ADRG4 is available in various package options, including SOIC-8 and VSSOP-8.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.