Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
UCC3809P-2G4
詳細を表示 DataSheets

UCC3809P-2G4

Product Overview

Category

UCC3809P-2G4 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size
  • Low power consumption

Package

UCC3809P-2G4 is available in a small outline package (SOP) format.

Essence

The essence of UCC3809P-2G4 lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input voltage range: 2.7V to 5.5V
  • Output voltage range: 0.8V to 3.6V
  • Operating temperature range: -40°C to 85°C
  • Maximum output current: 500mA
  • Switching frequency: 500kHz

Detailed Pin Configuration

  1. VDD: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for voltage regulation
  4. EN: Enable pin for turning the device on/off
  5. COMP: Compensation pin for stability control
  6. SS/TR: Soft-start and tracking pin
  7. CS: Current sense pin for current regulation
  8. OUT: Output pin for regulated voltage

Functional Features

  • Voltage regulation: UCC3809P-2G4 ensures stable output voltage within the specified range.
  • Current regulation: It provides precise control over the output current.
  • Soft-start: The soft-start feature allows gradual ramp-up of the output voltage, preventing sudden surges.
  • Efficiency optimization: This IC maximizes power conversion efficiency, reducing energy wastage.
  • Overcurrent protection: UCC3809P-2G4 incorporates overcurrent protection to safeguard the circuit from excessive current flow.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Compact size enables integration into space-constrained designs.
  • Precise voltage and current regulation ensure reliable performance.
  • Soft-start feature prevents voltage spikes during startup.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

UCC3809P-2G4 operates based on a pulse-width modulation (PWM) technique. It regulates the output voltage by adjusting the duty cycle of the switching signal. The feedback mechanism continuously monitors the output voltage and adjusts the duty cycle accordingly to maintain the desired voltage level. This control loop ensures stable and accurate voltage regulation.

Detailed Application Field Plans

UCC3809P-2G4 finds application in various fields, including: 1. Power supplies for consumer electronics 2. Battery-powered devices 3. Industrial automation systems 4. LED lighting systems 5. Automotive electronics

Detailed and Complete Alternative Models

  1. UCC3809PW-2G4
  2. UCC3809P-1G4
  3. UCC3809PW-1G4
  4. UCC3809D-2G4
  5. UCC3809D-1G4

These alternative models offer similar functionality and can be considered as substitutes for UCC3809P-2G4.

In conclusion, UCC3809P-2G4 is an integrated circuit designed for efficient power management. Its compact size, high efficiency, and precise regulation make it suitable for various applications. However, its limited maximum output current and operating temperature range should be taken into consideration when selecting this product for specific projects.

技術ソリューションにおける UCC3809P-2G4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of UCC3809P-2G4 in technical solutions:

  1. Q: What is UCC3809P-2G4? A: UCC3809P-2G4 is a high-performance current-mode PWM controller used in various power supply applications.

  2. Q: What are the key features of UCC3809P-2G4? A: Some key features include adjustable frequency operation, cycle-by-cycle current limiting, soft-start capability, and integrated error amplifier.

  3. Q: What is the typical input voltage range for UCC3809P-2G4? A: The typical input voltage range is between 7V and 30V.

  4. Q: Can UCC3809P-2G4 be used in both buck and boost converter topologies? A: Yes, UCC3809P-2G4 can be used in both buck and boost converter topologies.

  5. Q: How does UCC3809P-2G4 handle overcurrent protection? A: UCC3809P-2G4 incorporates cycle-by-cycle current limiting to protect against overcurrent conditions.

  6. Q: Does UCC3809P-2G4 have a built-in soft-start feature? A: Yes, UCC3809P-2G4 has a soft-start feature that allows for controlled startup of the power supply.

  7. Q: What is the maximum switching frequency supported by UCC3809P-2G4? A: The maximum switching frequency supported is typically around 1MHz.

  8. Q: Can UCC3809P-2G4 operate in continuous or discontinuous conduction mode? A: UCC3809P-2G4 can operate in both continuous and discontinuous conduction mode, depending on the application requirements.

  9. Q: What is the output voltage range that UCC3809P-2G4 can support? A: The output voltage range depends on the specific power supply design but can typically be adjusted within a wide range.

  10. Q: Is UCC3809P-2G4 suitable for high-efficiency power supply designs? A: Yes, UCC3809P-2G4 is designed to provide high efficiency in power supply applications when properly implemented.

Please note that these answers are general and may vary based on specific application requirements and design considerations.