Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
UCC2818DW
詳細を表示 DataSheets

UCC2818DW

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance PWM Controller
  • Package: SOIC-16
  • Essence: Regulates and controls power delivery in various applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 30V
  • Output Voltage Range: 0.8V to 28V
  • Maximum Duty Cycle: 100%
  • Oscillator Frequency Range: 50kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The UCC2818DW has a total of 16 pins. The pin configuration is as follows:

  1. COMP: Compensation pin for feedback control loop.
  2. CS: Current sense input pin for current mode control.
  3. SS/TR: Soft-start/Tracking pin for controlling the startup and shutdown timing.
  4. RT/CT: Timing resistor/capacitor connection pin for setting oscillator frequency.
  5. VREF: Reference voltage output pin for external use.
  6. GND: Ground reference pin.
  7. FB: Feedback pin for regulating the output voltage.

  8. VCC: Supply voltage input pin.

  9. NC: No connection pin.

  10. NC: No connection pin.
  11. NC: No connection pin.
  12. NC: No connection pin.
  13. NC: No connection pin.
  14. NC: No connection pin.
  15. NC: No connection pin.
  16. VIN: Input voltage pin.

Functional Features

  • Current Mode Control: Provides stable and efficient regulation by adjusting the duty cycle based on the current sense input.
  • Soft-Start Function: Enables controlled startup and shutdown of the power supply, preventing excessive inrush current.
  • Overvoltage Protection: Safeguards the system by monitoring the output voltage and shutting down the power supply if it exceeds a certain threshold.
  • Undervoltage Lockout: Prevents operation when the input voltage falls below a specified level, ensuring reliable performance.

Advantages and Disadvantages

Advantages: - High-performance PWM controller with wide input and output voltage ranges. - Flexible oscillator frequency selection for various applications. - Comprehensive protection features for enhanced system reliability.

Disadvantages: - Limited pin configuration options may restrict certain circuit designs. - Requires external components for complete functionality.

Working Principles

The UCC2818DW is a current mode PWM controller that regulates power delivery in various applications. It operates by comparing the feedback voltage (FB) with the reference voltage (VREF) to generate an error signal. This error signal is then processed to adjust the duty cycle of the PWM signal, which controls the power delivered to the load. The soft-start function ensures a controlled startup, while protection features such as overvoltage and undervoltage lockout enhance system safety.

Detailed Application Field Plans

The UCC2818DW is widely used in power management applications, including but not limited to: - Switching Power Supplies - Battery Chargers - LED Drivers - DC-DC Converters - Motor Control Systems

Detailed and Complete Alternative Models

  • UCC2818ADW
  • UCC2818AN
  • UCC2818APW
  • UCC2818AQDWRQ1
  • UCC2818AQDRQ1

These alternative models offer similar functionality and can be considered as substitutes for the UCC2818DW.

Word count: 356 words

技術ソリューションにおける UCC2818DW の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of UCC2818DW in technical solutions:

  1. Q: What is UCC2818DW? A: UCC2818DW is a pulse width modulation (PWM) controller IC used for controlling power converters in various applications.

  2. Q: What are the key features of UCC2818DW? A: Some key features include adjustable frequency, soft-start capability, cycle-by-cycle current limiting, and overvoltage protection.

  3. Q: How does UCC2818DW help in power converter designs? A: UCC2818DW provides precise control over the switching frequency and duty cycle, ensuring efficient power conversion and regulation.

  4. Q: Can UCC2818DW be used in both buck and boost converter designs? A: Yes, UCC2818DW can be used in both buck and boost converter designs, as well as in other topologies like flyback and forward converters.

  5. Q: How do I set the desired output voltage using UCC2818DW? A: The output voltage can be set by adjusting the feedback resistors connected to the error amplifier input pin of UCC2818DW.

  6. Q: Does UCC2818DW have any protection features? A: Yes, UCC2818DW has built-in protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown.

  7. Q: Can UCC2818DW operate at high frequencies? A: Yes, UCC2818DW can operate at high frequencies, typically up to several hundred kilohertz.

  8. Q: Is UCC2818DW suitable for low-power applications? A: Yes, UCC2818DW is suitable for low-power applications as it has a low quiescent current and can operate with low input voltages.

  9. Q: Can UCC2818DW be used in battery-powered systems? A: Yes, UCC2818DW can be used in battery-powered systems as it supports wide input voltage ranges and has low power consumption.

  10. Q: Are there any application notes or reference designs available for UCC2818DW? A: Yes, Texas Instruments provides application notes and reference designs that showcase the use of UCC2818DW in various power converter applications.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios.