Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
UC3625NG4
詳細を表示 DataSheets

UC3625NG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance voltage mode PWM controller
  • Package: DIP-16 (Dual In-Line Package with 16 pins)
  • Essence: Regulates and controls power supply voltages efficiently
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Input Voltage: 4.5V to 40V
  • Output Voltage: Adjustable from 1.23V to 37V
  • Switching Frequency: Up to 500kHz
  • Operating Temperature Range: -40°C to +85°C
  • Protection Features: Overcurrent protection, thermal shutdown, undervoltage lockout

Detailed Pin Configuration

The UC3625NG4 IC has a total of 16 pins arranged as follows:

  1. COMP: Compensation pin for regulating the output voltage.
  2. FB: Feedback pin for monitoring the output voltage.
  3. VREF: Reference voltage input pin.
  4. RT/CT: Timing components connection pin.
  5. CT: Timing capacitor connection pin.
  6. RT: Timing resistor connection pin.
  7. GND: Ground reference pin.
  8. VCC: Positive power supply pin.
  9. SYNC: Synchronization input pin.
  10. OSC: Oscillator timing capacitor connection pin.
  11. SS/TR: Soft-start and tracking pin.
  12. CS: Current sense input pin.
  13. DRVH: High-side gate driver output pin.
  14. DRVL: Low-side gate driver output pin.
  15. VSENSE: Voltage sense input pin.
  16. VIN: Input voltage pin.

Functional Features

  • High-performance voltage mode PWM control.
  • Wide input voltage range allows for versatile applications.
  • Adjustable output voltage provides flexibility.
  • High switching frequency enables efficient power conversion.
  • Comprehensive protection features ensure safe operation.
  • Synchronization input for multi-phase operation.
  • Soft-start and tracking capability for controlled startup.

Advantages and Disadvantages

Advantages: - Efficient power management and voltage regulation. - Wide input voltage range allows for various power sources. - Versatile applications due to adjustable output voltage. - Comprehensive protection features enhance reliability. - Synchronization input enables multi-phase operation.

Disadvantages: - Requires external timing components for operation. - Limited maximum output current capability. - Higher cost compared to simpler voltage regulators.

Working Principles

The UC3625NG4 operates as a voltage mode PWM controller. It regulates the output voltage by comparing it with a reference voltage (VREF) and adjusting the duty cycle of the PWM signal accordingly. This control mechanism ensures stable and accurate voltage regulation. The IC also incorporates protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout to safeguard the system.

Detailed Application Field Plans

The UC3625NG4 is widely used in various power management applications, including but not limited to: - Switching power supplies - DC-DC converters - Battery chargers - LED drivers - Industrial automation systems - Telecommunications equipment - Automotive electronics

Detailed and Complete Alternative Models

  1. UC3842: Similar voltage mode PWM controller with different pin configuration.
  2. LM2576: Buck converter IC with integrated switch.
  3. LT1073: Step-up/step-down DC-DC converter IC.
  4. TPS5430: High-performance synchronous buck converter IC.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 408 words

技術ソリューションにおける UC3625NG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of UC3625NG4 in technical solutions:

  1. Q: What is UC3625NG4? A: UC3625NG4 is a specific model of integrated circuit (IC) used for power management and control applications.

  2. Q: What are the typical applications of UC3625NG4? A: UC3625NG4 is commonly used in various technical solutions such as motor control, power supplies, and battery charging circuits.

  3. Q: What is the operating voltage range of UC3625NG4? A: The operating voltage range of UC3625NG4 is typically between 4.5V and 40V.

  4. Q: Can UC3625NG4 handle high currents? A: Yes, UC3625NG4 can handle high currents up to a certain limit, depending on the specific design and external components used.

  5. Q: Does UC3625NG4 have built-in protection features? A: Yes, UC3625NG4 offers various built-in protection features like overcurrent protection, thermal shutdown, and under-voltage lockout.

  6. Q: What is the maximum switching frequency of UC3625NG4? A: The maximum switching frequency of UC3625NG4 is typically around 500kHz.

  7. Q: Can UC3625NG4 be used in both analog and digital control systems? A: Yes, UC3625NG4 can be used in both analog and digital control systems, depending on the specific requirements of the application.

  8. Q: Is UC3625NG4 compatible with microcontrollers or other digital devices? A: Yes, UC3625NG4 can be easily interfaced with microcontrollers or other digital devices through its control inputs and feedback signals.

  9. Q: What is the typical efficiency of UC3625NG4 in power conversion applications? A: The efficiency of UC3625NG4 depends on various factors, but it can achieve high efficiencies ranging from 80% to 95% in most power conversion applications.

  10. Q: Are there any application notes or reference designs available for UC3625NG4? A: Yes, the manufacturer of UC3625NG4 typically provides application notes, reference designs, and datasheets that offer detailed information on how to use the IC in different technical solutions.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution. It is always recommended to refer to the official documentation and consult with experts for accurate and detailed information.