Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TS5A3359DCURG4
詳細を表示 DataSheets

TS5A3359DCURG4

Product Overview

  • Category: Integrated Circuits (ICs)
  • Use: Analog Switches
  • Characteristics:
    • Low ON-State Resistance
    • Low Charge Injection
    • Low Power Consumption
    • Wide Voltage Range
  • Package: VSSOP-8
  • Essence: This product is an analog switch that allows for the routing of analog signals in electronic circuits.
  • Packaging/Quantity: The TS5A3359DCURG4 is typically sold in reels of 2500 units.

Specifications

  • Number of Switches: 1
  • Switch Configuration: SPDT (Single Pole, Double Throw)
  • ON-State Resistance: 0.6 Ohms (Typical)
  • Supply Voltage Range: ±2.7V to ±5.5V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TS5A3359DCURG4 has a total of 8 pins:

  1. Pin 1: COM (Common Terminal)
  2. Pin 2: NO (Normally Open Terminal)
  3. Pin 3: NC (Normally Closed Terminal)
  4. Pin 4: GND (Ground)
  5. Pin 5: IN (Control Input)
  6. Pin 6: V+ (Positive Supply Voltage)
  7. Pin 7: V- (Negative Supply Voltage)
  8. Pin 8: VCC (Power Supply)

Functional Features

  • Low ON-State Resistance ensures minimal signal distortion and loss.
  • Low Charge Injection minimizes voltage spikes during switching.
  • Low Power Consumption helps conserve energy in portable devices.
  • Wide Voltage Range allows compatibility with various power supply levels.

Advantages and Disadvantages

Advantages: - High-quality analog signal routing - Low power consumption - Wide voltage range compatibility

Disadvantages: - Limited number of switches (only 1) - Relatively high ON-State Resistance compared to some alternatives

Working Principles

The TS5A3359DCURG4 operates based on the principle of a Single Pole, Double Throw (SPDT) switch. When the control input (IN) is activated, the switch connects the common terminal (COM) either to the normally open terminal (NO) or the normally closed terminal (NC), depending on the desired configuration.

Detailed Application Field Plans

The TS5A3359DCURG4 is commonly used in various applications, including:

  1. Audio Systems: Allows for audio signal routing and switching between different sources.
  2. Test and Measurement Equipment: Enables the selection of different test signals and measurement inputs.
  3. Communication Devices: Facilitates the switching of RF signals in wireless communication systems.
  4. Industrial Control Systems: Provides analog signal routing capabilities in control and monitoring systems.

Detailed and Complete Alternative Models

  1. CD4066B: Quad Bilateral Switch IC with similar characteristics and pin configuration.
  2. MAX4617: Low-Voltage, Single-Supply SPDT Analog Switch with improved ON-State Resistance.
  3. ADG1419: Precision CMOS, ±15 V, 4 Ohm, 8-Channel Analog Multiplexer.

These alternative models offer similar functionality and can be considered as substitutes for the TS5A3359DCURG4 in specific applications.

Word count: 436 words

技術ソリューションにおける TS5A3359DCURG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TS5A3359DCURG4 in technical solutions:

  1. Q: What is TS5A3359DCURG4? A: TS5A3359DCURG4 is a high-performance, low-power, single-pole, double-throw (SPDT) analog switch.

  2. Q: What are the key features of TS5A3359DCURG4? A: The key features include low on-state resistance, low power consumption, wide voltage range, and small package size.

  3. Q: What is the typical application of TS5A3359DCURG4? A: TS5A3359DCURG4 is commonly used for signal routing, audio switching, data acquisition, and other similar applications.

  4. Q: What is the maximum voltage rating of TS5A3359DCURG4? A: The maximum voltage rating is typically around 5V.

  5. Q: What is the on-state resistance of TS5A3359DCURG4? A: The on-state resistance is typically very low, usually in the range of a few ohms.

  6. Q: Can TS5A3359DCURG4 handle both analog and digital signals? A: Yes, TS5A3359DCURG4 can handle both analog and digital signals effectively.

  7. Q: Is TS5A3359DCURG4 suitable for battery-powered applications? A: Yes, TS5A3359DCURG4 is designed to operate with low power consumption, making it suitable for battery-powered applications.

  8. Q: Does TS5A3359DCURG4 have built-in protection features? A: Yes, TS5A3359DCURG4 has built-in ESD protection and can handle ±15kV human-body model (HBM) electrostatic discharge.

  9. Q: What is the operating temperature range of TS5A3359DCURG4? A: The operating temperature range is typically from -40°C to +85°C.

  10. Q: Can TS5A3359DCURG4 be used in automated test equipment (ATE) applications? A: Yes, TS5A3359DCURG4 is commonly used in ATE applications due to its high performance and reliability.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.