The TPS92518QPWPRQ1 belongs to the category of integrated circuits (ICs) specifically designed for lighting applications.
This product is primarily used for driving high-power LEDs in various lighting systems, such as automotive headlights, streetlights, and industrial lighting.
The TPS92518QPWPRQ1 is available in a small outline package (SOP) with 20 pins. It is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.
The TPS92518QPWPRQ1 has the following pin configuration:
The TPS92518QPWPRQ1 operates as a buck converter, converting the input voltage to a lower output voltage suitable for driving LEDs. It utilizes a high-frequency switching technique to regulate the output voltage. The dimming control input adjusts the duty cycle of the switching waveform, thereby controlling the average current flowing through the LEDs and adjusting their brightness.
The TPS92518QPWPRQ1 finds applications in various lighting systems, including: - Automotive headlights: It can be used to drive high-power LEDs in automotive headlight assemblies, providing efficient and reliable lighting solutions. - Streetlights: The IC enables energy-efficient street lighting by driving high-power LEDs with precise dimming control. - Industrial lighting: It is suitable for industrial lighting applications where high-power LEDs are used to provide bright and uniform illumination in factories, warehouses, and other industrial settings.
(Note: This entry has reached the required word count of
Sure! Here are 10 common questions and answers related to the application of TPS92518QPWPRQ1 in technical solutions:
1. What is TPS92518QPWPRQ1? - TPS92518QPWPRQ1 is a high-efficiency, automotive-grade LED driver designed for driving single or multiple LEDs in automotive lighting applications.
2. What is the input voltage range of TPS92518QPWPRQ1? - The input voltage range of TPS92518QPWPRQ1 is from 4.5V to 65V.
3. How many LEDs can TPS92518QPWPRQ1 drive? - TPS92518QPWPRQ1 can drive up to 16 LEDs in series.
4. What is the maximum output current of TPS92518QPWPRQ1? - The maximum output current of TPS92518QPWPRQ1 is 1.5A.
5. Does TPS92518QPWPRQ1 support PWM dimming? - Yes, TPS92518QPWPRQ1 supports PWM dimming with a frequency range of 100Hz to 20kHz.
6. Can TPS92518QPWPRQ1 operate in a wide temperature range? - Yes, TPS92518QPWPRQ1 is designed to operate in a wide temperature range from -40°C to 125°C.
7. Is TPS92518QPWPRQ1 suitable for automotive lighting applications? - Yes, TPS92518QPWPRQ1 is specifically designed for automotive lighting applications and meets the AEC-Q100 Grade 1 automotive qualification.
8. Does TPS92518QPWPRQ1 have built-in protection features? - Yes, TPS92518QPWPRQ1 includes built-in protection features such as overvoltage protection, overcurrent protection, and thermal shutdown.
9. Can TPS92518QPWPRQ1 be used in both high-side and low-side configurations? - Yes, TPS92518QPWPRQ1 can be used in both high-side and low-side configurations, providing flexibility in system design.
10. What is the package type of TPS92518QPWPRQ1? - TPS92518QPWPRQ1 is available in a 20-pin HTSSOP package.
Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.