Category: Voltage Regulator
Use: Power Management
Characteristics: Low Dropout Regulator (LDO)
Package: SOT-23
Essence: High-performance, low-power voltage regulator
Packaging/Quantity: Tape and Reel, 3000 pieces per reel
The TPS73033DBVR is a 5-pin device with the following pin configuration:
The TPS73033DBVR is a low dropout regulator that maintains a stable output voltage despite variations in the input voltage. It achieves this by using a pass transistor to regulate the voltage across a series resistor. The feedback mechanism compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain the desired output voltage.
The TPS73033DBVR is commonly used in various applications, including:
These alternative models offer different specifications and can be chosen based on specific application requirements.
Word count: 443 words
Sure! Here are 10 common questions and answers related to the application of TPS73033DBVR in technical solutions:
Q: What is TPS73033DBVR? A: TPS73033DBVR is a low-dropout voltage regulator (LDO) manufactured by Texas Instruments.
Q: What is the input voltage range for TPS73033DBVR? A: The input voltage range for TPS73033DBVR is typically between 2.7V and 5.5V.
Q: What is the output voltage of TPS73033DBVR? A: The output voltage of TPS73033DBVR is fixed at 3.3V.
Q: What is the maximum output current of TPS73033DBVR? A: The maximum output current of TPS73033DBVR is 200mA.
Q: Is TPS73033DBVR suitable for battery-powered applications? A: Yes, TPS73033DBVR is suitable for battery-powered applications due to its low quiescent current and low dropout voltage.
Q: Can TPS73033DBVR handle input voltages higher than 5.5V? A: No, TPS73033DBVR is not designed to handle input voltages higher than 5.5V. It may get damaged if the input voltage exceeds this limit.
Q: Does TPS73033DBVR require any external components for operation? A: Yes, TPS73033DBVR requires an input capacitor and an output capacitor for stable operation. The values and types of these capacitors are specified in the datasheet.
Q: What is the dropout voltage of TPS73033DBVR? A: The dropout voltage of TPS73033DBVR is typically around 160mV at 200mA load current.
Q: Can TPS73033DBVR be used in automotive applications? A: Yes, TPS73033DBVR is suitable for automotive applications as it meets the AEC-Q100 qualification requirements.
Q: What are the typical applications of TPS73033DBVR? A: TPS73033DBVR is commonly used in battery-powered devices, portable electronics, industrial equipment, and automotive systems where a stable 3.3V power supply is required.
Please note that these answers are general and may vary depending on specific design considerations and requirements. It is always recommended to refer to the datasheet and consult with an expert for accurate information.