Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TPS70148PWP
詳細を表示 DataSheets

TPS70148PWP

Product Overview

Category

The TPS70148PWP belongs to the category of power management integrated circuits (PMICs).

Use

This PMIC is designed to provide power management solutions for various electronic devices and systems.

Characteristics

  • High efficiency: The TPS70148PWP offers high conversion efficiency, minimizing power loss during operation.
  • Wide input voltage range: It can handle a wide range of input voltages, making it suitable for diverse applications.
  • Low quiescent current: The PMIC has a low quiescent current, ensuring minimal power consumption in standby mode.
  • Overcurrent protection: It incorporates overcurrent protection features to safeguard connected devices from damage.

Package

The TPS70148PWP comes in a small outline package (SOP) with a thermal pad, allowing efficient heat dissipation.

Essence

The essence of the TPS70148PWP lies in its ability to efficiently regulate and distribute power to electronic devices, ensuring their optimal performance.

Packaging/Quantity

This PMIC is typically available in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 2.7V to 6.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 1.5A
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The TPS70148PWP features the following pin configuration:

  1. VIN: Input voltage pin
  2. EN: Enable pin
  3. PG: Power good indicator pin
  4. GND: Ground pin
  5. FB: Feedback pin
  6. SW: Switching node pin
  7. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: The TPS70148PWP provides stable output voltage, ensuring reliable operation of connected devices.
  • Power sequencing: It supports power sequencing functionality, enabling controlled power-up and power-down sequences.
  • Soft-start: The PMIC incorporates a soft-start feature to minimize inrush current during startup, preventing damage to components.
  • Fault protection: It includes various protection mechanisms such as overcurrent, overvoltage, and thermal shutdown to safeguard the system.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption and longer battery life.
  • Wide input voltage range allows compatibility with different power sources.
  • Compact package with thermal pad enhances heat dissipation and reliability.
  • Comprehensive fault protection ensures device and system safety.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Operating temperature range might restrict usage in extreme environments.

Working Principles

The TPS70148PWP operates based on a switching regulator topology. It utilizes an internal control loop to regulate the output voltage by adjusting the duty cycle of the internal power switch. This enables efficient conversion of the input voltage to the desired output voltage while minimizing power loss.

Detailed Application Field Plans

The TPS70148PWP finds applications in various electronic systems, including but not limited to: - Portable consumer electronics - Industrial automation equipment - Internet of Things (IoT) devices - Automotive electronics - Medical devices

Detailed and Complete Alternative Models

  1. TPS70102PWP: Similar to TPS70148PWP, but with a lower maximum output current of 1A.
  2. TPS70118PWP: Similar to TPS70148PWP, but with a higher maximum output current of 1.8A.
  3. TPS70125PWP: Similar to TPS70148PWP, but with a higher maximum output current of 2.5A.

These alternative models offer similar functionality and characteristics, allowing users to choose the most suitable option based on their specific requirements.

Word count: 532 words

技術ソリューションにおける TPS70148PWP の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TPS70148PWP in technical solutions:

  1. Q: What is TPS70148PWP? A: TPS70148PWP is a power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of TPS70148PWP? A: Some key features of TPS70148PWP include a wide input voltage range, multiple output voltage rails, high efficiency, and overcurrent protection.

  3. Q: What is the input voltage range supported by TPS70148PWP? A: TPS70148PWP supports an input voltage range from 4.5V to 40V.

  4. Q: How many output voltage rails does TPS70148PWP provide? A: TPS70148PWP provides three output voltage rails: VOUT1, VOUT2, and VOUT3.

  5. Q: Can TPS70148PWP handle high current loads? A: Yes, TPS70148PWP has a maximum output current capability of up to 1.5A per channel.

  6. Q: Does TPS70148PWP have any built-in protection features? A: Yes, TPS70148PWP includes overcurrent protection (OCP) to safeguard against excessive current draw.

  7. Q: Is TPS70148PWP suitable for battery-powered applications? A: Yes, TPS70148PWP has a low quiescent current and can be used in battery-powered applications to conserve energy.

  8. Q: Can TPS70148PWP operate in harsh environments? A: TPS70148PWP has a wide operating temperature range of -40°C to 125°C, making it suitable for use in harsh environments.

  9. Q: What is the package type of TPS70148PWP? A: TPS70148PWP comes in a small and compact HTSSOP-20 package.

  10. Q: Are there any evaluation boards or reference designs available for TPS70148PWP? A: Yes, Texas Instruments provides evaluation boards and reference designs that can help users quickly prototype and implement TPS70148PWP in their technical solutions.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.