Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TPS2399DGK
詳細を表示 DataSheets

TPS2399DGK

Product Overview

Category

The TPS2399DGK belongs to the category of integrated circuits (ICs).

Use

This IC is primarily used for power management and protection in electronic devices.

Characteristics

  • The TPS2399DGK is a highly efficient and reliable power management solution.
  • It offers advanced protection features to safeguard electronic devices from overvoltage, overcurrent, and short-circuit conditions.
  • This IC provides precise control and regulation of power distribution within a system.
  • It is designed to optimize power efficiency and minimize energy wastage.

Package

The TPS2399DGK is available in a small form factor package known as DGK. This package ensures easy integration into various electronic systems.

Essence

The essence of the TPS2399DGK lies in its ability to efficiently manage power distribution and protect electronic devices from potential damage.

Packaging/Quantity

The TPS2399DGK is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0V to 18V
  • Maximum Continuous Current: 2A
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: DGK

Detailed Pin Configuration

The TPS2399DGK has the following pin configuration:

  1. VIN: Input voltage pin
  2. VOUT: Output voltage pin
  3. GND: Ground pin
  4. EN: Enable pin
  5. FAULT: Fault indication pin
  6. ILIM: Current limit setting pin
  7. PG: Power good indication pin

Functional Features

  • Overvoltage Protection: The TPS2399DGK monitors the output voltage and protects against overvoltage conditions, ensuring the safety of connected devices.
  • Overcurrent Protection: It incorporates overcurrent detection and protection mechanisms to prevent damage caused by excessive current flow.
  • Short-Circuit Protection: The IC detects short-circuit conditions and quickly shuts down the power supply to avoid further damage.
  • Power Sequencing: It enables controlled power sequencing, ensuring proper startup and shutdown sequences for connected devices.
  • Fault Indication: The TPS2399DGK provides a fault indication signal (FAULT pin) to alert the system about any abnormal operating conditions.

Advantages and Disadvantages

Advantages

  • Efficient power management and protection capabilities
  • Compact package size for easy integration
  • Wide input voltage range for versatile applications
  • Precise control and regulation of power distribution
  • Advanced fault detection and indication features

Disadvantages

  • Limited maximum continuous current capacity (2A)
  • Operating temperature range may not be suitable for extreme environments

Working Principles

The TPS2399DGK operates based on a combination of internal circuitry and control logic. It continuously monitors the input and output voltages, as well as the current flow. By comparing these values with predefined thresholds, it can detect and respond to various fault conditions. The IC utilizes its built-in protection mechanisms to ensure safe and reliable power management.

Detailed Application Field Plans

The TPS2399DGK finds applications in various fields, including but not limited to: 1. Consumer Electronics: Power management and protection in smartphones, tablets, laptops, and gaming consoles. 2. Industrial Automation: Control systems, motor drives, and power supplies. 3. Automotive: Battery management systems, electric vehicle charging stations, and automotive electronics. 4. Telecommunications: Network equipment, routers, and switches. 5. Renewable Energy: Solar inverters, wind turbine control systems, and energy storage systems.

Detailed and Complete Alternative Models

  1. TPS2389DGK: Similar to the TPS2399DGK, but with a higher maximum continuous current capacity of 3A.
  2. TPS2379DGK: A variant with additional features such as adjustable current limit and thermal shutdown protection.
  3. TPS2409DGK: Offers similar power management and protection capabilities, but with a different pin configuration.

These alternative models provide flexibility in choosing the most suitable IC based on specific application requirements.

Word count: 598 words

技術ソリューションにおける TPS2399DGK の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TPS2399DGK in technical solutions:

  1. Q: What is the TPS2399DGK? A: The TPS2399DGK is a power management integrated circuit (PMIC) designed for use in power sourcing equipment (PSE) applications.

  2. Q: What is the purpose of the TPS2399DGK? A: The TPS2399DGK is used to control and manage power delivery in systems that require Power over Ethernet (PoE) functionality.

  3. Q: What are the key features of the TPS2399DGK? A: Some key features of the TPS2399DGK include IEEE 802.3bt-compliant PoE, advanced power management capabilities, and built-in protection mechanisms.

  4. Q: Can the TPS2399DGK support high-power PoE applications? A: Yes, the TPS2399DGK is capable of supporting high-power PoE applications, including those that require up to 90W of power delivery.

  5. Q: How does the TPS2399DGK ensure safe power delivery? A: The TPS2399DGK incorporates various protection mechanisms such as overcurrent protection, overvoltage protection, and thermal shutdown to ensure safe power delivery.

  6. Q: Can the TPS2399DGK be used in both single-port and multi-port PSE designs? A: Yes, the TPS2399DGK is versatile and can be used in both single-port and multi-port PSE designs, making it suitable for a wide range of applications.

  7. Q: Does the TPS2399DGK support power classification? A: Yes, the TPS2399DGK supports power classification according to the IEEE 802.3bt standard, allowing for efficient power management and allocation.

  8. Q: What is the input voltage range supported by the TPS2399DGK? A: The TPS2399DGK can operate with an input voltage range of 36V to 57V, which is typical for PoE applications.

  9. Q: Can the TPS2399DGK be used in industrial environments? A: Yes, the TPS2399DGK is designed to withstand harsh industrial environments and has a wide operating temperature range of -40°C to 125°C.

  10. Q: Are there any evaluation modules or reference designs available for the TPS2399DGK? A: Yes, Texas Instruments provides evaluation modules and reference designs that can help developers quickly prototype and implement solutions using the TPS2399DGK.

Please note that the answers provided here are general and may vary depending on specific application requirements and design considerations.