Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TPS22913BYZVR
詳細を表示 DataSheets

TPS22913BYZVR

Product Overview

Category

The TPS22913BYZVR belongs to the category of power management integrated circuits (PMICs).

Use

It is primarily used for power distribution and control in electronic devices.

Characteristics

  • Low on-resistance
  • Fast switching speed
  • Overcurrent protection
  • Thermal shutdown protection

Package

The TPS22913BYZVR is available in a small package, such as a 4-ball wafer chip scale package (WCSP).

Essence

The essence of TPS22913BYZVR lies in its ability to efficiently manage power distribution and control in electronic devices.

Packaging/Quantity

The TPS22913BYZVR is typically packaged in reels or trays, with a quantity of around 3000 units per reel.

Specifications

  • Input voltage range: 1.5V to 5.5V
  • On-resistance: 20mΩ (typical)
  • Maximum continuous current: 2A
  • Operating temperature range: -40°C to 85°C

Detailed Pin Configuration

The TPS22913BYZVR has the following pin configuration:

  1. VIN: Input voltage
  2. EN: Enable pin
  3. GND: Ground
  4. VOUT: Output voltage

Functional Features

  • Power distribution and control
  • Overcurrent protection
  • Thermal shutdown protection
  • Fast switching speed for efficient power management

Advantages and Disadvantages

Advantages

  • Low on-resistance ensures minimal power loss
  • Fast switching speed allows for efficient power management
  • Overcurrent and thermal shutdown protection enhance device safety

Disadvantages

  • Limited maximum continuous current of 2A may not be suitable for high-power applications
  • Restricted operating temperature range (-40°C to 85°C) may limit usage in extreme environments

Working Principles

The TPS22913BYZVR operates by controlling the flow of power from the input voltage (VIN) to the output voltage (VOUT) based on the enable pin (EN). It utilizes low on-resistance and fast switching speed to efficiently distribute and control power. The device incorporates overcurrent protection to prevent damage due to excessive current and thermal shutdown protection to safeguard against overheating.

Detailed Application Field Plans

The TPS22913BYZVR finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices - IoT devices

In these applications, it is used for power management, ensuring efficient distribution and control of power to different components within the devices.

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the TPS22913BYZVR are: - TPS22914BYZVR - TPS22915BYZVR - TPS22916BYZVR

These models offer similar functionality and characteristics, providing options for different design requirements.

(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)

技術ソリューションにおける TPS22913BYZVR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TPS22913BYZVR in technical solutions:

  1. Q: What is TPS22913BYZVR? A: TPS22913BYZVR is a low-voltage, ultra-low RON load switch with controlled turn-on.

  2. Q: What is the typical input voltage range for TPS22913BYZVR? A: The typical input voltage range for TPS22913BYZVR is between 0.65V and 5.5V.

  3. Q: What is the maximum continuous current that TPS22913BYZVR can handle? A: TPS22913BYZVR can handle a maximum continuous current of 2A.

  4. Q: Can TPS22913BYZVR be used for power sequencing applications? A: Yes, TPS22913BYZVR can be used for power sequencing applications due to its controlled turn-on feature.

  5. Q: Does TPS22913BYZVR have an integrated thermal shutdown feature? A: Yes, TPS22913BYZVR has an integrated thermal shutdown feature to protect against excessive temperature.

  6. Q: What is the typical quiescent current of TPS22913BYZVR? A: The typical quiescent current of TPS22913BYZVR is very low, typically around 1µA.

  7. Q: Can TPS22913BYZVR be used in battery-powered applications? A: Yes, TPS22913BYZVR can be used in battery-powered applications due to its low quiescent current and wide input voltage range.

  8. Q: Does TPS22913BYZVR have an enable pin? A: Yes, TPS22913BYZVR has an enable pin that can be used to control the load switch operation.

  9. Q: What is the typical rise time of TPS22913BYZVR? A: The typical rise time of TPS22913BYZVR is very fast, typically around 10µs.

  10. Q: Can TPS22913BYZVR handle inrush currents during power-up? A: Yes, TPS22913BYZVR is designed to handle inrush currents during power-up, making it suitable for various applications.

Please note that these answers are general and may vary depending on the specific application and use case. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.