Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TPIC6A596NE
詳細を表示 DataSheets

TPIC6A596NE

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Shift Register and Latch
  • Characteristics: High voltage, high current, and high-speed operation
  • Package: DIP (Dual In-line Package) or SOIC (Small Outline Integrated Circuit)
  • Essence: Control and drive various loads in automotive applications
  • Packaging/Quantity: Available in reels or tubes, quantity varies based on manufacturer

Specifications

  • Supply Voltage: 3.3V to 5.5V
  • Output Current: Up to 500mA per channel
  • Number of Channels: 8
  • Maximum Clock Frequency: 20MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TPIC6A596NE has a total of 20 pins. The pin configuration is as follows:

  1. GND (Ground)
  2. Q0 (Output 0)
  3. Q1 (Output 1)
  4. Q2 (Output 2)
  5. Q3 (Output 3)
  6. Q4 (Output 4)
  7. Q5 (Output 5)
  8. Q6 (Output 6)
  9. Q7 (Output 7)
  10. VCC (Supply Voltage)
  11. SER (Serial Data Input)
  12. RCLK (Register Clock Input)
  13. SRCLK (Shift Register Clock Input)
  14. OE (Output Enable)
  15. MR (Master Reset)
  16. DS (Serial Data Output)
  17. STCP (Storage Register Clock Input)
  18. SHCP (Shift Register Clock Input)
  19. SIN (Serial Data Input)
  20. SOUT (Serial Data Output)

Functional Features

  • Shift Register: Allows serial data input to be shifted into the register
  • Latch: Stores the shifted data and outputs it to the corresponding channels
  • Output Enable (OE): Enables or disables the outputs
  • Master Reset (MR): Resets the shift register and latch to their initial state

Advantages and Disadvantages

Advantages: - High voltage and high current capability - Fast operation with a maximum clock frequency of 20MHz - Suitable for automotive applications due to its robustness and reliability

Disadvantages: - Limited number of channels (8) - Requires external components for proper operation

Working Principles

The TPIC6A596NE is designed to control and drive various loads in automotive applications. It consists of a shift register and a latch. The shift register allows serial data to be inputted and shifted into the register. The latch stores the shifted data and outputs it to the corresponding channels.

The outputs can handle high voltages and currents, making it suitable for driving loads such as lamps, relays, and solenoids in automotive systems. The device operates at a high speed, allowing for efficient control of these loads.

Detailed Application Field Plans

The TPIC6A596NE is commonly used in automotive applications, including:

  1. Automotive lighting systems: Controlling the brightness and sequencing of lamps.
  2. Power distribution modules: Managing the distribution of power to various components in the vehicle.
  3. Motor control: Driving motors for functions like windshield wipers, power windows, and seat adjustments.
  4. Relay control: Activating and deactivating relays for various functions in the vehicle.

Detailed and Complete Alternative Models

  1. TPIC6B595: Similar functionality but with a different pin configuration.
  2. TPIC6C595: Higher voltage and current ratings compared to TPIC6A596NE.
  3. SN74HC595: A CMOS-based shift register and latch with similar features.

These alternative models offer similar functionality and can be considered as replacements based on specific requirements.

Word count: 380 words

技術ソリューションにおける TPIC6A596NE の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TPIC6A596NE in technical solutions:

  1. Question: What is TPIC6A596NE?
    Answer: TPIC6A596NE is a high-voltage, high-current shift register designed for use in various applications such as LED displays, relays, solenoids, and other high-power peripheral drivers.

  2. Question: What is the maximum voltage rating of TPIC6A596NE?
    Answer: The maximum voltage rating of TPIC6A596NE is typically 50V.

  3. Question: How many outputs does TPIC6A596NE have?
    Answer: TPIC6A596NE has 8 open-drain outputs that can sink up to 150mA each.

  4. Question: Can TPIC6A596NE be used with both CMOS and TTL logic levels?
    Answer: Yes, TPIC6A596NE is compatible with both CMOS and TTL logic levels, making it versatile for different applications.

  5. Question: Does TPIC6A596NE require external components for operation?
    Answer: Yes, TPIC6A596NE requires external pull-up resistors on the output lines and a decoupling capacitor for proper operation.

  6. Question: What is the maximum clock frequency supported by TPIC6A596NE?
    Answer: TPIC6A596NE can operate at clock frequencies up to 20MHz, allowing for fast data transfer and control.

  7. Question: Can TPIC6A596NE be cascaded to drive more than 8 outputs?
    Answer: Yes, multiple TPIC6A596NE devices can be cascaded together to drive a larger number of outputs, expanding the capabilities of the system.

  8. Question: Is TPIC6A596NE capable of driving inductive loads?
    Answer: Yes, TPIC6A596NE is designed to handle inductive loads such as relays and solenoids, thanks to its built-in flyback diodes.

  9. Question: What is the recommended operating temperature range for TPIC6A596NE?
    Answer: The recommended operating temperature range for TPIC6A596NE is typically -40°C to +125°C.

  10. Question: Can TPIC6A596NE be used in automotive applications?
    Answer: Yes, TPIC6A596NE is suitable for automotive applications due to its high-voltage and high-current capabilities, making it ideal for driving various loads in vehicles.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.