Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TPA6030A4PWP
詳細を表示 DataSheets

TPA6030A4PWP

Introduction

The TPA6030A4PWP is a high-performance audio amplifier belonging to the category of integrated circuits. This device is commonly used in audio applications and offers various characteristics that make it suitable for a wide range of uses. The TPA6030A4PWP comes in a small package and provides essential features for audio amplification, making it a valuable component in electronic devices.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: Audio Amplification
  • Characteristics: High performance, small package size, low power consumption
  • Package: PowerPAD HTSSOP-28
  • Essence: Provides high-quality audio amplification in a compact form factor
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Power Supply Voltage: 2.5V to 5.5V
  • Output Power: Up to 2.8W into 3Ω at 5V
  • Total Harmonic Distortion + Noise (THD+N): 0.1% at 1W into 8Ω
  • Shutdown Current: 0.1μA (typical)
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The TPA6030A4PWP has a pin configuration as follows: 1. OUT- 2. OUT+ 3. GND 4. VDD 5. SDZ 6. MODE 7. MUTE 8. BIAS 9. BYPASS 10. NC 11. NC 12. NC 13. NC 14. NC 15. NC 16. NC 17. NC 18. NC 19. NC 20. NC 21. NC 22. NC 23. NC 24. NC 25. NC 26. NC 27. NC 28. NC

Functional Features

  • High Efficiency: The TPA6030A4PWP operates with high efficiency, minimizing power consumption.
  • Low Distortion: It offers low distortion and noise, ensuring high-quality audio output.
  • Flexible Operation: The device supports multiple modes of operation, enhancing its versatility in different applications.

Advantages and Disadvantages

Advantages

  • High efficiency
  • Low distortion
  • Small package size
  • Versatile operation modes

Disadvantages

  • Limited output power compared to higher wattage amplifiers
  • Requires external components for optimal performance in some configurations

Working Principles

The TPA6030A4PWP operates by amplifying the input audio signal and delivering it to the connected speaker or load. It utilizes efficient circuitry to minimize power consumption while maintaining high fidelity audio reproduction. The device can be controlled through its various pins to enable different modes of operation and power management.

Detailed Application Field Plans

The TPA6030A4PWP is well-suited for various audio applications, including but not limited to: - Portable speakers - Headphone amplifiers - Automotive audio systems - Home entertainment systems

Detailed and Complete Alternative Models

Some alternative models to the TPA6030A4PWP include: - TPA6017A2PWP - TPA6211A1PWP - TPA301DGN - TPA311DGN - TPA5050RSAR

In conclusion, the TPA6030A4PWP is a versatile and efficient audio amplifier integrated circuit that offers high-quality audio amplification in a compact form factor. Its specifications, functional features, and application field plans make it a valuable component in various electronic devices.

[Word Count: 529]

技術ソリューションにおける TPA6030A4PWP の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the TPA6030A4PWP?

    • The TPA6030A4PWP is a 2.5-W mono fully differential audio power amplifier with an advanced integrated boost converter.

  2. What are the typical applications of TPA6030A4PWP?

    • It is commonly used in portable and battery-powered audio systems, such as smartphones, tablets, and portable speakers.

  3. What is the input voltage range for TPA6030A4PWP?

    • The input voltage range is typically between 2.5V to 5.5V.

  4. What is the output power capability of TPA6030A4PWP?

    • The TPA6030A4PWP can deliver up to 2.5W of continuous average power into a 4-Ω load.

  5. What is the efficiency of the integrated boost converter in TPA6030A4PWP?

    • The boost converter has a high efficiency, typically around 90%.

  6. Does TPA6030A4PWP require external compensation components?

    • No, it does not require external compensation components, which simplifies the design process.

  7. What is the thermal performance of TPA6030A4PWP?

    • The device has built-in thermal protection and can operate over a wide temperature range, making it suitable for various environments.

  8. Can TPA6030A4PWP be used in bridge-tied load (BTL) configuration?

    • Yes, it can be configured for BTL operation to achieve higher output power.

  9. What are the key features of TPA6030A4PWP?

    • Some key features include low quiescent current, short-circuit and thermal protection, and a small package size for space-constrained designs.

  10. Are there any application notes or reference designs available for TPA6030A4PWP?

    • Yes, Texas Instruments provides comprehensive application notes and reference designs to assist with the implementation of TPA6030A4PWP in various technical solutions.