Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLV2463QDG4
詳細を表示 DataSheets

TLV2463QDG4

Product Overview

Category

TLV2463QDG4 belongs to the category of operational amplifiers (op-amps).

Use

This product is commonly used in various electronic circuits and systems for amplification, filtering, and signal conditioning purposes.

Characteristics

  • Low power consumption
  • Rail-to-rail input and output
  • High slew rate
  • Wide bandwidth
  • Low offset voltage and low noise

Package

TLV2463QDG4 is available in a small outline package (SOIC) with 8 pins.

Essence

The essence of TLV2463QDG4 lies in its ability to provide high-performance amplification while consuming minimal power.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply voltage: ±2.5 V to ±6 V
  • Input offset voltage: 1 mV (maximum)
  • Input bias current: 1 pA (typical)
  • Gain bandwidth product: 10 MHz (typical)
  • Slew rate: 6 V/μs (typical)
  • Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

  1. OUT1: Output 1
  2. IN-: Inverting input
  3. IN+: Non-inverting input
  4. VCC+: Positive supply voltage
  5. VCC-: Negative supply voltage
  6. NC: No connection
  7. OUT2: Output 2
  8. GND: Ground

Functional Features

  • Rail-to-rail input and output capability allows for maximum dynamic range.
  • Low offset voltage and low noise ensure accurate and clean signal amplification.
  • High slew rate enables fast response to input signal changes.
  • Wide bandwidth facilitates the amplification of high-frequency signals.

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered applications.
  • Rail-to-rail input and output allows for maximum signal swing.
  • High slew rate enables accurate reproduction of fast-changing signals.
  • Wide bandwidth ensures faithful amplification of high-frequency signals.

Disadvantages

  • Limited supply voltage range compared to some other op-amps.
  • May not be suitable for applications requiring extremely low noise levels.

Working Principles

TLV2463QDG4 operates based on the principles of operational amplifiers. It amplifies the difference between its inverting and non-inverting inputs, producing an output voltage that is a multiple of this difference. The rail-to-rail input and output capability allows for maximum utilization of the available supply voltage range.

Detailed Application Field Plans

TLV2463QDG4 finds applications in various fields, including but not limited to: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Active filters 4. Data acquisition systems 5. Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to TLV2463QDG4 with similar characteristics and performance include: 1. LM324 2. MCP6004 3. AD8628 4. MAX4239

These alternatives can be considered based on specific application requirements and availability.

Word count: 345 words

技術ソリューションにおける TLV2463QDG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TLV2463QDG4 in technical solutions:

  1. Question: What is TLV2463QDG4?
    - Answer: TLV2463QDG4 is a low-power, rail-to-rail input/output operational amplifier (op-amp) that is commonly used in various electronic applications.

  2. Question: What is the supply voltage range for TLV2463QDG4?
    - Answer: The supply voltage range for TLV2463QDG4 is typically between 2.7V and 6V.

  3. Question: What is the input voltage range for TLV2463QDG4?
    - Answer: The input voltage range for TLV2463QDG4 extends from the negative supply voltage (V-) to the positive supply voltage (V+).

  4. Question: What is the typical gain bandwidth product (GBW) of TLV2463QDG4?
    - Answer: The typical GBW of TLV2463QDG4 is around 2 MHz.

  5. Question: Can TLV2463QDG4 operate with a single power supply?
    - Answer: Yes, TLV2463QDG4 can operate with a single power supply as long as it is within the specified supply voltage range.

  6. Question: What is the input bias current of TLV2463QDG4?
    - Answer: The input bias current of TLV2463QDG4 is typically very low, around 1 pA.

  7. Question: Is TLV2463QDG4 suitable for precision applications?
    - Answer: Yes, TLV2463QDG4 is suitable for precision applications due to its low offset voltage and low input bias current.

  8. Question: Can TLV2463QDG4 drive capacitive loads?
    - Answer: Yes, TLV2463QDG4 can drive capacitive loads up to a certain limit. It is recommended to refer to the datasheet for specific details.

  9. Question: What is the temperature range for TLV2463QDG4?
    - Answer: The temperature range for TLV2463QDG4 is typically between -40°C and 125°C.

  10. Question: Are there any application notes or reference designs available for TLV2463QDG4?
    - Answer: Yes, Texas Instruments provides application notes and reference designs that can help in understanding and implementing TLV2463QDG4 in various technical solutions. These resources can be found on their official website.

Please note that these answers are general and may vary depending on the specific requirements and conditions of your application. It is always recommended to refer to the datasheet and consult with the manufacturer for accurate and detailed information.