Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLV2454IPW
詳細を表示 DataSheets

TLV2454IPW

Product Overview

Category

TLV2454IPW belongs to the category of integrated circuit (IC) amplifiers.

Use

This product is commonly used as a general-purpose operational amplifier (op-amp) in various electronic applications.

Characteristics

  • High gain and bandwidth
  • Low input offset voltage
  • Low noise
  • Rail-to-rail input and output capability

Package

TLV2454IPW is available in a standard 14-pin TSSOP (Thin Shrink Small Outline Package) package.

Essence

The essence of TLV2454IPW lies in its ability to amplify and process analog signals with high precision and low distortion.

Packaging/Quantity

TLV2454IPW is typically sold in reels, with each reel containing a specified quantity of ICs. The exact quantity may vary depending on the manufacturer or distributor.

Specifications

  • Supply Voltage: ±2.5V to ±6V
  • Input Offset Voltage: 1.5mV (maximum)
  • Gain Bandwidth Product: 10MHz (typical)
  • Slew Rate: 6V/µs (typical)
  • Input Bias Current: 1pA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TLV2454IPW has a total of 14 pins, numbered as follows:

  1. OUT1: Output 1
  2. IN-: Inverting Input
  3. IN+: Non-Inverting Input
  4. VCC+: Positive Power Supply
  5. VCC-: Negative Power Supply
  6. NC: No Connection
  7. OUT2: Output 2
  8. NC: No Connection
  9. NC: No Connection
  10. NC: No Connection
  11. NC: No Connection
  12. NC: No Connection
  13. NC: No Connection
  14. NC: No Connection

Functional Features

  • High precision amplification of analog signals
  • Wide input voltage range
  • Low distortion and noise
  • Rail-to-rail input and output capability
  • Stable performance over a wide temperature range

Advantages and Disadvantages

Advantages

  • High gain and bandwidth for accurate signal processing
  • Low input offset voltage for precise measurements
  • Rail-to-rail input and output capability for maximum signal swing
  • Low noise for improved signal integrity

Disadvantages

  • Limited supply voltage range compared to some other op-amps
  • Higher cost compared to basic op-amp models

Working Principles

TLV2454IPW operates based on the principles of differential amplification and feedback control. It amplifies the voltage difference between its inverting and non-inverting inputs, providing an amplified output signal that is proportional to the input signal.

Detailed Application Field Plans

TLV2454IPW finds applications in various fields, including:

  1. Audio Amplification: Used in audio systems for amplifying low-level audio signals with high fidelity.
  2. Sensor Signal Conditioning: Used to amplify and process signals from sensors such as temperature sensors, pressure sensors, etc.
  3. Instrumentation: Used in precision measurement instruments for accurate signal amplification and conditioning.
  4. Active Filters: Utilized in active filter circuits for frequency response shaping and signal filtering.
  5. Industrial Control Systems: Employed in control systems for amplifying and processing control signals.

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to TLV2454IPW are:

  1. LM324: A widely used general-purpose op-amp with similar characteristics.
  2. AD8628: A low-noise, rail-to-rail op-amp suitable for precision applications.
  3. MCP6004: A low-power, rail-to-rail op-amp with a wide supply voltage range.

These alternative models offer similar functionality and can be chosen based on specific application requirements.

Word count: 536 words

技術ソリューションにおける TLV2454IPW の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TLV2454IPW in technical solutions:

  1. Q: What is TLV2454IPW? A: TLV2454IPW is a quad operational amplifier (op-amp) IC that is commonly used in various electronic circuits.

  2. Q: What is the supply voltage range for TLV2454IPW? A: The supply voltage range for TLV2454IPW is typically between 2.7V and 6V.

  3. Q: What is the maximum output current of TLV2454IPW? A: The maximum output current of TLV2454IPW is typically around 30mA.

  4. Q: Can TLV2454IPW be used in single-supply applications? A: Yes, TLV2454IPW can be used in both single-supply and dual-supply applications.

  5. Q: What is the input offset voltage of TLV2454IPW? A: The input offset voltage of TLV2454IPW is typically around 1mV.

  6. Q: What is the bandwidth of TLV2454IPW? A: The bandwidth of TLV2454IPW is typically around 10MHz.

  7. Q: Is TLV2454IPW suitable for low-power applications? A: Yes, TLV2454IPW is designed for low-power consumption, making it suitable for battery-powered devices.

  8. Q: Can TLV2454IPW drive capacitive loads? A: Yes, TLV2454IPW has a high slew rate and can drive capacitive loads up to a certain limit.

  9. Q: Does TLV2454IPW have built-in protection features? A: Yes, TLV2454IPW has built-in short-circuit and thermal protection features to ensure safe operation.

  10. Q: What are some common applications of TLV2454IPW? A: TLV2454IPW is commonly used in audio amplifiers, active filters, signal conditioning circuits, and sensor interfaces.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.