Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLV2264AIDRG4
詳細を表示 DataSheets

TLV2264AIDRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low Voltage, Rail-to-Rail Output, Dual Channel
  • Package: SOIC-8
  • Essence: TLV2264AIDRG4 is a dual-channel operational amplifier designed for low voltage applications with rail-to-rail output capability.
  • Packaging/Quantity: The TLV2264AIDRG4 is available in a tape and reel packaging, with 2500 units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 6V
  • Input Offset Voltage: ±1mV (maximum)
  • Input Bias Current: ±1pA (typical)
  • Gain Bandwidth Product: 10MHz (typical)
  • Slew Rate: 3.5V/µs (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TLV2264AIDRG4 has a standard SOIC-8 package with the following pin configuration:

___________ Vcc | 1 8 | Vout A Vin A | 2 7 | Vcc Vin B | 3 6 | Vout B Gnd | 4 5 | NC ‾‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  • Low voltage operation: The TLV2264AIDRG4 operates within a wide supply voltage range of 2.7V to 6V, making it suitable for low power applications.
  • Rail-to-rail output: It provides an output voltage that can swing close to both the positive and negative supply rails, maximizing the dynamic range of the amplifier.
  • Dual channel: The TLV2264AIDRG4 consists of two independent operational amplifiers in a single package, allowing for flexible circuit design.

Advantages and Disadvantages

Advantages: - Wide supply voltage range enables operation in various low voltage applications. - Rail-to-rail output allows for maximum utilization of the available voltage range. - Dual-channel configuration provides flexibility in circuit design.

Disadvantages: - Limited bandwidth compared to some other operational amplifiers. - Higher input offset voltage compared to precision amplifiers.

Working Principles

The TLV2264AIDRG4 is based on a CMOS process technology, which allows for low voltage operation. It utilizes a differential input stage followed by a gain stage and an output buffer. The rail-to-rail output capability is achieved through careful design of the output stage, ensuring that the output voltage can swing close to both the positive and negative supply rails.

Detailed Application Field Plans

The TLV2264AIDRG4 is commonly used in various low voltage applications, including but not limited to:

  1. Battery-powered devices: Due to its low voltage operation and rail-to-rail output, it is suitable for use in portable electronics such as smartphones, tablets, and wearable devices.
  2. Sensor interfaces: The TLV2264AIDRG4 can be used to amplify and condition signals from sensors, making it ideal for applications in industrial automation, automotive systems, and medical devices.
  3. Audio amplification: Its rail-to-rail output capability makes it suitable for audio amplification circuits, where it can drive headphones or small speakers directly.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the TLV2264AIDRG4 include:

  1. LMV321: Low voltage, rail-to-rail output, single-channel operational amplifier.
  2. MCP6002: Low voltage, rail-to-rail output, dual-channel operational amplifier.
  3. MAX44246: Low voltage, rail-to-rail output, precision operational amplifier.

These alternative models can be considered based on specific application requirements and design constraints.

Word count: 431 words

技術ソリューションにおける TLV2264AIDRG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TLV2264AIDRG4:

  1. Q: What is TLV2264AIDRG4? A: TLV2264AIDRG4 is a low-power, rail-to-rail input/output operational amplifier (op-amp) manufactured by Texas Instruments.

  2. Q: What is the supply voltage range for TLV2264AIDRG4? A: The supply voltage range for TLV2264AIDRG4 is typically between 2.7V and 6V.

  3. Q: What is the typical quiescent current consumption of TLV2264AIDRG4? A: The typical quiescent current consumption of TLV2264AIDRG4 is around 500 microamps.

  4. Q: Can TLV2264AIDRG4 operate with a single power supply? A: Yes, TLV2264AIDRG4 can operate with a single power supply as it supports rail-to-rail input and output operation.

  5. Q: What is the maximum output current TLV2264AIDRG4 can deliver? A: TLV2264AIDRG4 can deliver a maximum output current of approximately 40 milliamps.

  6. Q: Is TLV2264AIDRG4 suitable for low-voltage applications? A: Yes, TLV2264AIDRG4 is suitable for low-voltage applications due to its low supply voltage requirement and rail-to-rail operation.

  7. Q: Does TLV2264AIDRG4 have built-in protection features? A: Yes, TLV2264AIDRG4 has built-in features like short-circuit protection and thermal shutdown to ensure safe operation.

  8. Q: What is the typical gain bandwidth product of TLV2264AIDRG4? A: The typical gain bandwidth product of TLV2264AIDRG4 is around 1 megahertz.

  9. Q: Can TLV2264AIDRG4 be used in audio applications? A: Yes, TLV2264AIDRG4 can be used in audio applications as it offers low distortion and high output current capability.

  10. Q: Is TLV2264AIDRG4 available in surface mount package? A: Yes, TLV2264AIDRG4 is available in a surface mount package (SOIC-14) for easy integration into PCB designs.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.