Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLE2082IDRG4
詳細を表示 DataSheets

TLE2082IDRG4

Product Overview

Category

TLE2082IDRG4 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal amplification and processing.

Characteristics

  • High input impedance
  • Low noise
  • Wide bandwidth
  • Rail-to-rail output swing
  • Low distortion

Package

TLE2082IDRG4 is available in a small outline package (SOIC) with 8 pins.

Essence

The essence of TLE2082IDRG4 lies in its ability to provide high-quality signal amplification and processing, making it suitable for various applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply voltage: ±2.5V to ±18V
  • Input offset voltage: ±1mV
  • Input bias current: ±10nA
  • Gain bandwidth product: 10MHz
  • Slew rate: 13V/µs
  • Operating temperature range: -40°C to +125°C

Detailed Pin Configuration

TLE2082IDRG4 has the following pin configuration:

Pin 1: Non-inverting input Pin 2: Inverting input Pin 3: V- Pin 4: V+ Pin 5: Output Pin 6: NC (No Connection) Pin 7: NC (No Connection) Pin 8: VCC

Functional Features

  • High input impedance allows for easy interfacing with different signal sources.
  • Low noise ensures accurate signal amplification without introducing additional disturbances.
  • Wide bandwidth enables the amplification of signals across a broad frequency range.
  • Rail-to-rail output swing provides maximum dynamic range for signal processing.
  • Low distortion ensures faithful reproduction of the input signal.

Advantages and Disadvantages

Advantages

  • High-quality signal amplification
  • Low noise performance
  • Wide bandwidth for versatile applications
  • Rail-to-rail output swing
  • Low distortion

Disadvantages

  • Limited number of pins for additional functionalities
  • Requires external power supply

Working Principles

TLE2082IDRG4 operates based on the principles of operational amplifiers (op-amps). It amplifies the input signal by a fixed gain, which can be adjusted using external resistors. The amplified signal is then available at the output pin for further processing or transmission.

Detailed Application Field Plans

TLE2082IDRG4 finds applications in various fields, including:

  1. Audio Amplification: It can be used in audio systems to amplify weak signals from microphones or musical instruments.
  2. Sensor Signal Conditioning: TLE2082IDRG4 can process and amplify signals from sensors such as temperature, pressure, or light sensors.
  3. Instrumentation Systems: It is suitable for precision measurement and data acquisition systems that require accurate signal amplification.
  4. Communication Equipment: This product can be utilized in communication devices for signal conditioning and amplification.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to TLE2082IDRG4 are:

  1. TL072: Dual operational amplifier with low noise and wide bandwidth.
  2. LM358: Dual operational amplifier with rail-to-rail output swing and low distortion.
  3. AD822: Precision instrumentation amplifier with high common-mode rejection ratio.

These alternative models can be considered based on specific application requirements and design constraints.

Word count: 448 words

技術ソリューションにおける TLE2082IDRG4 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TLE2082IDRG4 in technical solutions:

  1. Q: What is TLE2082IDRG4? A: TLE2082IDRG4 is a dual operational amplifier (op-amp) that is commonly used in various technical applications.

  2. Q: What are the key features of TLE2082IDRG4? A: Some key features of TLE2082IDRG4 include low offset voltage, high slew rate, wide bandwidth, low noise, and low input bias current.

  3. Q: What is the typical supply voltage range for TLE2082IDRG4? A: The typical supply voltage range for TLE2082IDRG4 is between ±2.5V and ±18V.

  4. Q: Can TLE2082IDRG4 operate with a single power supply? A: Yes, TLE2082IDRG4 can operate with a single power supply as long as it is within the specified voltage range.

  5. Q: What is the maximum output current of TLE2082IDRG4? A: The maximum output current of TLE2082IDRG4 is typically around 40mA.

  6. Q: Is TLE2082IDRG4 suitable for audio applications? A: Yes, TLE2082IDRG4 is often used in audio applications due to its low noise and high bandwidth characteristics.

  7. Q: Can TLE2082IDRG4 be used in precision measurement circuits? A: Yes, TLE2082IDRG4 is suitable for precision measurement circuits due to its low offset voltage and low input bias current.

  8. Q: Does TLE2082IDRG4 have built-in protection features? A: No, TLE2082IDRG4 does not have built-in protection features. External protection circuitry may be required for certain applications.

  9. Q: What is the temperature range for TLE2082IDRG4? A: The operating temperature range for TLE2082IDRG4 is typically between -40°C and 125°C.

  10. Q: Can TLE2082IDRG4 be used in high-speed signal processing applications? A: Yes, TLE2082IDRG4 has a high slew rate and wide bandwidth, making it suitable for high-speed signal processing applications.

Please note that these answers are general and may vary depending on specific application requirements.