TLC272IDRG4
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics:
- Low power consumption
- Rail-to-rail input and output
- Wide supply voltage range
- High slew rate
- Package: SOIC-8 (Small Outline Integrated Circuit)
- Essence: Dual Operational Amplifier
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Supply Voltage Range: 3V to 16V
- Input Offset Voltage: ±2mV (maximum)
- Input Bias Current: ±20nA (maximum)
- Input Offset Current: ±5nA (maximum)
- Gain Bandwidth Product: 2.2MHz (typical)
- Slew Rate: 3.6V/µs (typical)
- Common Mode Rejection Ratio: 70dB (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLC272IDRG4 has a standard SOIC-8 pin configuration as follows:
__ __
OUT1| |__| |Vcc+
IN(-)1| |
IN(+)1| |
Vcc-| |
IN(+)2| |
IN(-)2| |
OUT2|_________|
Functional Features
- Low power consumption allows for extended battery life in portable devices.
- Rail-to-rail input and output capability enables the amplifier to operate with signals close to the supply rails.
- Wide supply voltage range allows for flexibility in various applications.
- High slew rate ensures fast response to input signal changes.
Advantages and Disadvantages
Advantages: - Low power consumption - Rail-to-rail input and output - Wide supply voltage range - High slew rate
Disadvantages: - Limited gain bandwidth product compared to some other operational amplifiers in the market - Higher input offset voltage compared to precision operational amplifiers
Working Principles
The TLC272IDRG4 is a dual operational amplifier that amplifies the difference between two input voltages. It operates based on the principles of differential amplification and feedback control. The input signals are amplified by the internal circuitry and the amplified output is provided at the respective output pins.
Detailed Application Field Plans
The TLC272IDRG4 is commonly used in various applications, including but not limited to: - Audio amplification - Signal conditioning - Sensor interfaces - Active filters - Voltage and current measurement circuits - Data acquisition systems
Detailed and Complete Alternative Models
Some alternative models to the TLC272IDRG4 include: - LM358 - TL072 - AD822 - MCP602
These alternatives offer similar functionality and can be used as replacements depending on specific application requirements.
Word count: 273 words
技術ソリューションにおける TLC272IDRG4 の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the operating voltage range of TLC272IDRG4?
- The operating voltage range of TLC272IDRG4 is 3V to 16V.Can TLC272IDRG4 be used in single-supply applications?
- Yes, TLC272IDRG4 can be used in single-supply applications.What is the typical input offset voltage of TLC272IDRG4?
- The typical input offset voltage of TLC272IDRG4 is 150µV.Is TLC272IDRG4 suitable for low-power applications?
- Yes, TLC272IDRG4 is suitable for low-power applications with its low quiescent current of 60µA per channel.What is the temperature range for TLC272IDRG4?
- TLC272IDRG4 has a temperature range of -40°C to 125°C.Can TLC272IDRG4 be used in audio applications?
- Yes, TLC272IDRG4 can be used in audio applications due to its low noise and distortion.Does TLC272IDRG4 have built-in EMI filtering?
- No, TLC272IDRG4 does not have built-in EMI filtering.What is the typical slew rate of TLC272IDRG4?
- The typical slew rate of TLC272IDRG4 is 3.6V/µs.Is TLC272IDRG4 suitable for precision instrumentation applications?
- Yes, TLC272IDRG4 is suitable for precision instrumentation applications due to its low input bias current and offset voltage.Can TLC272IDRG4 be used in automotive electronics?
- Yes, TLC272IDRG4 is suitable for automotive electronics with its wide operating temperature range and robustness against environmental stress.