Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TL16C550CIPTR
詳細を表示 DataSheets

TL16C550CIPTR

Product Overview

Category: Integrated Circuit (IC)

Use: The TL16C550CIPTR is a UART (Universal Asynchronous Receiver/Transmitter) IC that provides serial communication capabilities in electronic devices. It is commonly used for data transmission between microcontrollers, computers, and other digital devices.

Characteristics: - High-speed data transfer - Low power consumption - Compact size - Reliable performance

Package: The TL16C550CIPTR comes in a small form factor package, making it suitable for space-constrained applications. It is available in a 48-pin thin quad flat pack (TQFP) package.

Essence: The TL16C550CIPTR is an essential component for enabling serial communication in various electronic devices. It facilitates the exchange of data between different systems, allowing for efficient and reliable information transfer.

Packaging/Quantity: The TL16C550CIPTR is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Data Rate: Up to 1.5 Mbps
  • Operating Voltage: 3.3V
  • Number of Channels: 1
  • FIFO Buffer Size: 16 bytes
  • Operating Temperature Range: -40°C to +85°C
  • Supply Current: 10 mA (typical)
  • Package Dimensions: 7mm x 7mm

Detailed Pin Configuration

The TL16C550CIPTR has a total of 48 pins. Here is a detailed pin configuration:

  1. VCC - Power supply voltage
  2. GND - Ground
  3. CTS - Clear to Send
  4. RTS - Request to Send
  5. RxD - Receive Data
  6. TxD - Transmit Data
  7. DSR - Data Set Ready
  8. DCD - Data Carrier Detect
  9. RI - Ring Indicator
  10. REFCLK - Reference Clock Input
  11. INT - Interrupt Output 12-27. Reserved 28-35. GPIO0-GPIO7 - General Purpose Input/Output pins 36-48. Reserved

Functional Features

  • Full-duplex operation
  • Programmable baud rate generator
  • Automatic hardware and software flow control
  • Parity generation and detection
  • Break generation and detection
  • Modem control signals (CTS, RTS, DSR, DCD, RI)
  • Interrupt-driven operation
  • Power management features for low power consumption

Advantages and Disadvantages

Advantages: - High-speed data transfer capability - Low power consumption - Compact size for space-constrained applications - Reliable performance in various operating conditions - Support for hardware and software flow control - Flexible baud rate configuration

Disadvantages: - Limited number of channels (only 1 channel) - Small FIFO buffer size (16 bytes)

Working Principles

The TL16C550CIPTR operates based on the UART communication protocol. It converts parallel data into serial format for transmission and vice versa. The IC uses a programmable baud rate generator to establish the desired data transfer speed. It also incorporates hardware and software flow control mechanisms to ensure reliable data transmission between devices.

Detailed Application Field Plans

The TL16C550CIPTR finds applications in various fields where serial communication is required. Some of the common application areas include: - Embedded systems - Industrial automation - Telecommunications - Networking equipment - Consumer electronics

Alternative Models

Here are some alternative models that offer similar functionality to the TL16C550CIPTR: - MAX232 - RS-232 Transceiver IC - FT232R - USB to UART Interface IC - PL2303HX - USB to Serial Bridge Controller

These alternative models can be considered based on specific requirements and compatibility with the target system.

Word count: 510 words

技術ソリューションにおける TL16C550CIPTR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TL16C550CIPTR in technical solutions:

  1. Q: What is TL16C550CIPTR? A: TL16C550CIPTR is a UART (Universal Asynchronous Receiver/Transmitter) chip that provides serial communication capabilities in technical solutions.

  2. Q: What are the key features of TL16C550CIPTR? A: TL16C550CIPTR features include a 16-byte FIFO buffer, programmable baud rate generator, support for various data formats, and compatibility with multiple microcontrollers.

  3. Q: How can I interface TL16C550CIPTR with a microcontroller? A: TL16C550CIPTR can be interfaced with a microcontroller using standard UART communication protocols such as RS-232 or TTL levels.

  4. Q: What is the purpose of the FIFO buffer in TL16C550CIPTR? A: The FIFO buffer in TL16C550CIPTR helps in improving data transmission efficiency by temporarily storing incoming and outgoing data.

  5. Q: Can TL16C550CIPTR handle different data formats? A: Yes, TL16C550CIPTR supports various data formats including 5, 6, 7, or 8-bit characters, with optional parity and stop bits.

  6. Q: What is the maximum baud rate supported by TL16C550CIPTR? A: TL16C550CIPTR can support baud rates up to 1.5 Mbps, depending on the clock frequency provided.

  7. Q: Does TL16C550CIPTR have any flow control mechanisms? A: Yes, TL16C550CIPTR supports hardware flow control using RTS (Request to Send) and CTS (Clear to Send) signals.

  8. Q: Can TL16C550CIPTR be used in both full-duplex and half-duplex communication? A: Yes, TL16C550CIPTR can be used in both full-duplex (simultaneous transmit and receive) and half-duplex (alternating transmit and receive) modes.

  9. Q: Is TL16C550CIPTR compatible with different operating voltages? A: Yes, TL16C550CIPTR is compatible with a wide range of operating voltages, typically from 3.3V to 5V.

  10. Q: What are some common applications of TL16C550CIPTR? A: TL16C550CIPTR is commonly used in applications such as industrial automation, embedded systems, data communication, and serial device control.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.