Texas Instruments
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TAS5186ADDVR
詳細を表示 DataSheets

TAS5186ADDVR

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Audio Amplifier
  • Characteristics:
    • High-performance Class-D amplifier
    • Single-chip solution for audio amplification
    • Low power consumption
    • Compact package size
  • Package: VSON-32
  • Essence: Efficient audio amplification in a small form factor
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Power Supply Voltage: 10V to 26V
  • Output Power: Up to 100W per channel
  • Total Harmonic Distortion + Noise (THD+N): <0.1%
  • Signal-to-Noise Ratio (SNR): >100dB
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The TAS5186ADDVR has a total of 32 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | GND | Ground | | 2 | INP | Positive input terminal | | 3 | INN | Negative input terminal | | 4 | VDD | Power supply voltage | | 5 | PVDD | Power supply voltage for the output stage | | ... | ... | ... | | 32 | PGND | Power ground |

Functional Features

  • High-efficiency operation
  • Wide operating voltage range
  • Overcurrent and overtemperature protection
  • Short-circuit protection
  • Advanced modulation scheme for improved audio quality
  • Built-in mute and standby modes for power saving

Advantages and Disadvantages

Advantages: - High power efficiency - Compact size - Low power consumption - Excellent audio quality - Built-in protection features

Disadvantages: - Limited output power compared to some other amplifiers - Requires external components for proper operation

Working Principles

The TAS5186ADDVR is a Class-D audio amplifier that utilizes pulse width modulation (PWM) to amplify audio signals. It converts the input analog audio signal into a high-frequency digital PWM signal, which is then amplified by the output stage. The high-efficiency operation of Class-D amplifiers allows for reduced power consumption and heat dissipation.

Detailed Application Field Plans

The TAS5186ADDVR is commonly used in various audio applications, including: - Home theater systems - Car audio systems - Professional audio equipment - Multimedia speakers - Soundbars

Detailed and Complete Alternative Models

  • TAS5611A: Similar Class-D audio amplifier with higher output power
  • TPA3116D2: Class-D audio amplifier with integrated audio processing features
  • STA516B: Class-D audio amplifier with built-in digital audio interface

These alternative models offer different features and specifications, providing options for various audio amplification requirements.

Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.

技術ソリューションにおける TAS5186ADDVR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TAS5186ADDVR in technical solutions:

  1. Q: What is TAS5186ADDVR? A: TAS5186ADDVR is a digital audio amplifier integrated circuit (IC) designed for high-performance audio applications.

  2. Q: What are the key features of TAS5186ADDVR? A: The key features of TAS5186ADDVR include high efficiency, low distortion, wide dynamic range, and built-in protection mechanisms.

  3. Q: What is the typical power output of TAS5186ADDVR? A: TAS5186ADDVR can deliver up to 100 watts per channel into 4-ohm speakers.

  4. Q: Can TAS5186ADDVR be used in both consumer and professional audio systems? A: Yes, TAS5186ADDVR is suitable for a wide range of applications, including home theater systems, soundbars, and professional audio equipment.

  5. Q: Does TAS5186ADDVR support multiple input formats? A: Yes, TAS5186ADDVR supports various input formats, including I2S, TDM, and S/PDIF.

  6. Q: Is TAS5186ADDVR compatible with different speaker configurations? A: Yes, TAS5186ADDVR can drive both stereo and mono speaker setups, making it versatile for different system designs.

  7. Q: Does TAS5186ADDVR require external components for operation? A: TAS5186ADDVR requires minimal external components, such as power supply and input/output connectors, to function properly.

  8. Q: Can TAS5186ADDVR operate at different voltage levels? A: Yes, TAS5186ADDVR supports a wide range of supply voltages, typically between 12V and 26V.

  9. Q: Does TAS5186ADDVR have built-in protection features? A: Yes, TAS5186ADDVR includes protection mechanisms like over-temperature, over-current, and short-circuit protection to ensure safe operation.

  10. Q: Are there any evaluation boards or reference designs available for TAS5186ADDVR? A: Yes, Texas Instruments provides evaluation boards and reference designs that can help in the development and implementation of TAS5186ADDVR in various applications.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.