The SN74LVTH373DWRG4 has a total of 20 pins. The pin configuration is as follows:
The SN74LVTH373DWRG4 offers the following functional features:
Advantages: - High-speed operation enables efficient data processing - Low-voltage operation reduces power consumption - 3-state outputs facilitate bus sharing in complex systems
Disadvantages: - Limited voltage range (2.7V to 3.6V) - Propagation delay may affect timing-sensitive applications
The SN74LVTH373DWRG4 operates as an 8-bit transparent D-type latch. When the latch enable (LE) input is high, the data inputs (D0-D7) are transferred to the outputs (Q0-Q7). The output enable (OE) input controls whether the outputs are active or in a high-impedance state.
The SN74LVTH373DWRG4 can be used in various applications, including:
These alternative models offer similar functionality to the SN74LVTH373DWRG4 and can be considered based on specific requirements and availability.
Word count: 495 words
Sure! Here are 10 common questions and answers related to the application of SN74LVTH373DWRG4:
Question: What is the SN74LVTH373DWRG4?
- Answer: The SN74LVTH373DWRG4 is a octal transparent D-type latch with 3-state outputs, designed for low-voltage (2.7V to 3.6V) applications.
Question: What is the purpose of the SN74LVTH373DWRG4?
- Answer: This IC is commonly used as a latch or flip-flop in digital circuits to store and control data.
Question: What is the maximum operating frequency of the SN74LVTH373DWRG4?
- Answer: The maximum operating frequency of this IC is typically around 200 MHz.
Question: How many inputs and outputs does the SN74LVTH373DWRG4 have?
- Answer: It has 8 inputs (D0-D7) and 8 outputs (Q0-Q7).
Question: Can the SN74LVTH373DWRG4 be used with different voltage levels?
- Answer: Yes, it is compatible with both TTL and CMOS voltage levels.
Question: What is the power supply voltage range for the SN74LVTH373DWRG4?
- Answer: The recommended power supply voltage range is between 2.7V and 3.6V.
Question: Does the SN74LVTH373DWRG4 support 3-state outputs?
- Answer: Yes, it has 3-state outputs which allow multiple devices to share a common bus.
Question: What is the output current capability of the SN74LVTH373DWRG4?
- Answer: The output current capability is typically around 12 mA.
Question: Can the SN74LVTH373DWRG4 be used in high-speed applications?
- Answer: Yes, it has a fast propagation delay and can be used in high-speed digital systems.
Question: Is the SN74LVTH373DWRG4 available in different package options?
- Answer: Yes, it is available in various package options such as SOIC, TSSOP, and TVSOP.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.